On Thursday 06 February 2003 22:20, Eric W. Biederman wrote: > Jarmo Tulonen <[EMAIL PROTECTED]> writes: > > Hello > > > > I'm still struggling with the Tyan Tiger MPX (aka S2466). > > I tested this time with the programs I downloaded from > > ftp.lnxi.com, compiling from the tar packet and using > > etherboot 5.1.5 as payload. It loads the kernel from the > > tftp server but when it should jump to the kernel, it just dies. > > I also tried with the pre-made rom image from the > > rpm-package, with the same result. > > If I load etherboot from floppy, it gets the kernel from > > the tftp server and starts it up ok. > > Any ideas how to proceed ? > > I can think of two possibilities. > 1) You don't have serial console support in your kernel, > or it is not properly configured so you do not see what is going on. > 2) You may have run into the recent mkelfImage bug, that I just fixed. > > > Eric
Hello I just got it to work. My problem was that I was generating the kernel image with mkelf-linux and not with mkelfImage. (Actually I did try also mkelfImage at some phase but then I didn't have the console=ttyS0 option appended. So it worked but I didn't know it :-) Thank you for your reply Jarmo _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
