SMA_SIZE should set the amount of framebuffer memory; but which are the possible values? How can I set the minimum, or 8MB, or 64MB?
SiS 630 Dev 0 FN 0 Register 63h DRAM Status Register
Bit 7 =1 enable, =0 disable, shared memory
Bits[6:4] Size (Total Share memory size for 128 bit mode) Shared Memory Size on DIMM0 000 2M 4M 001 4M 8M 010 8M 16M 011 16M 32M 100 32M 64M 101 64M Not Supported Others : Reserved
Bit 3: reserved Bit 2: DIMM2 installed =1, absent =0 Bit 1: DIMM1 " Bit 0: DIMM0 "
/dev/hda -> 0 /dev/hdb -> 1 /dev/hdc -> 2 /dev/hdd -> 3
Is it correct???
Yes. Some of us boot from /dev/hdc using CF, then mount /dev/hda0 as the root device.
P.S. Is it possible to boot from a CDROM?
Not sure, probably not.
-Steve
_______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
