Heechul,
> With current linuxbios for EPIA, I found that internel graphic device (bus
> 1, dev 0 ) is not visible in the pci configuration space. I have tried to
> enable this by setting PP_Rx3E and RxA9 registers, but with failed.
> Do you know how to make it visible?
Including this setup will enable the vga device. Hope this help.
-Andrew
--
Andrew Ip
Email: [EMAIL PROTECTED]
Tel: (852) 2542 2046
Fax: (852) 2542 2036
Mobile: (852) 9201 9866
Cwlinux Limited
Unit 202B 2/F Lai Cheong Factory Building,
479-479A Castle Peak Road,
Lai Chi Kok, Kowloon,
Hong Kong.
Tel: (852)2542 2046
Fax: (852)2542 2036
For public pgp key, please obtain it from http://www.keyserver.net/en.
#if VIDEO_CONSOLE
CS_WRITE($0xf6, $0x01)
CS_WRITE($0xf7, $0x01)
// CS_WRITE($0xf8, $0x22)
CS_WRITE($0xf8, $0x22)
CS_WRITE($0xf9, $0x42)
CS_WRITE($0xfa, $0x00)
CS_WRITE($0xfb, $0xb0)
CS_WRITE($0xfd, $0x08)
CS_WRITE($0xa0, $0x02)
CS_WRITE($0xa1, $0x00)
CS_WRITE($0xa2, $0x20)
CS_WRITE($0xa3, $0x00)
CS_WRITE($0xa4, $0x07)
CS_WRITE($0xa5, $0x02)
CS_WRITE($0xa6, $0x00)
CS_WRITE($0xa7, $0x07)
CS_WRITE($0xac, $0x6e)
CS_WRITE($0xad, $0x62)
#endif
#if HAVE_FRAMEBUFFER
CS_WRITE($0x13, $0xd0)
// CS_WRITE($0x80, $0x0f)
// CS_WRITE($0x81, $0x41)
// CS_WRITE($0x88, $0x02)
// from steve
CS_WRITE($0x56, $0x20)
CS_WRITE($0x57, $0x20)
// CS_WRITE($0x63, $0x01)
// CS_WRITE($0x80, $0x0f)
// CS_WRITE($0x84, $0xf0)
// CS_WRITE($0x89, $0x00)
// CS_WRITE($0x8a, $0x00)
// CS_WRITE($0x8b, $0x00)
#endif
