Thanks ron. I has another problem with reading SPD. I'm using ASUS P4B533-V motherboard. I couldn't get the VID and DID of 82801DB. And of course, I could not read the SPDt.
How can I fix it? Charlie ----- Original Message ----- From: "Ronald G. Minnich" <[EMAIL PROTECTED]> To: "Charlie Song" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Wednesday, March 12, 2003 6:34 PM Subject: Re: SPD problem > On Wed, 12 Mar 2003, Charlie Song wrote: > > > I'm trying to use "scanspd" to read SPD. It works fine for some > > motherboards. But it read back 0s for other motherboards. > > some motherboards have two I2C bussees, one for SPD and one for sensors. > The BIOS uses the I2C bus for SPD, then sets a register so that the I2C > can only be used for sensors. > > The ASUS CUA works this way. The result is that you have to find the > hardware that sets the register and change it for SPD. > > ron _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
