On Sat, 29 Mar 2003, Joey Nelson wrote: > What are the areas I may have to customize for FB2510? I'm willing and > able to dig into the source code if necessary. Just point me to where > it is necessary. Is there any information I'm going to have to ask > Fabiatech for?
here is the easiest thing to do. Look at some of the HOWTOs (e.g. the sbc710 etc.). Then try to build a pcm-5823 linuxbios and load it into flash and see how it works on the board. I doubt all the pieces will work, but if you get serial output of any kind, I think the port will be easy. I have found with several GEODE boards that the only thing that changes much is the IRQ table and which super io they use. If the bios even works a little (I.e. you get serial out) considering using one of the two portguides to tell you how to make a linuxbios port for this board. Also consider writing a version of this portguide for this board -- the more portguides the better. For the rest of your questions, let's get to them after you have done a basic linuxbios port. But, I see no problems doing what you are trying to do. ron p.s. I'm on vacation this week so my answers will be sporadic, but I'm here. _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
