I am bouncing this to the LinuxBIOS list because most of the discusion happens there. And I am extremely busy at the moment.
Rudolf Marek <[EMAIL PROTECTED]> writes: > Hello, > > I have ASUS A7S333 (Sis745). > > On I2C I got only one winbond chip and one unknown device. > No SPD eeprom no PLL. > > I read somewhere that you are curios to know if other ASUS mainboards > got this feature. So here is my answer. > > I want to enable the SPD i2c in case I can read the SPD timings. > (I wrote i2c driver patch for my 745 into lm_sensors, ten to my surprise > theese SPD and PLL devices "missing") > > Unfortunatelly I dont have SiS745 spec so I dont know where to trigger > this back. Would you give me some hint please? The only hint I have is that boards like this tend to have a mux on the i2c line. Either controlled by a gpio line. Or I have seen the controlled by an i2c device. > Thank you. > > Rudolf Marek > > CTU prague student. Welcome, Eric _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
