try using the -w switch with the path to your rom Brian G Rhodes [EMAIL PROTECTED] [EMAIL PROTECTED] +1 612-741-1191
On Wed, 23 Jul 2003, gimyung han wrote: > hi everyone !! > > I'm trying to burn romimage on the VIA-EPIA (VIA C3-800 Mhz, VT8231) > > I just succeeded in making romimage, and I cd into > /freebios/util/flash_and_burn, and type make to compile. > > Finally, I got excutive file "flash_rom". > > To test "flash_rom", I typed flash_rom without any parameter. > and I saw following message > > Calibrating timer since microsleep sucks ... takes a second > Setting up microsecond timing loop > 153M loops per second > OK, calibrated, now do the deed > Enabling flash write on VT8231...tried to set 0x44 to 0x54 on VT8231 failed > (WARNING ONLY) > Trying Am29F040B, 512 KB > probe_29f040b: id1 0x25, id2 0xa6 > Trying At29C040A, 512 KB > probe_jedec: id1 0xbf, id2 0xb6 > Trying Mx29f002, 256 KB > probe_29f002: id1 191, id2 182 > Trying SST29EE020A, 256 KB > probe_jedec: id1 0xbf, id2 0xb6 > Trying SST28SF040A, 512 KB > probe_28sf040: id1 0x25, id2 0xa6 > Trying SST39SF020A, 256 KB > probe_39sf020: id1 0xbf, id2 0xb6 > SST39SF020A found at physical address: 0xfffc0000 > Part is SST39SF020A > OK, only ENABLING flash write, but NOT FLASHING > > > and then, I type "./flash_rom /root/epia/romimage". > > "/root/epia/romimage" is a full path of romimage I had made. > > I saw messges like below > > Calibrating timer since microsleep sucks ... takes a second > Setting up microsecond timing loop > 152M loops per second > OK, calibrated, now do the deed > Enabling flash write on VT8231...OK > Trying Am29F040B, 512 KB > probe_29f040b: id1 0x25, id2 0xa6 > Trying At29C040A, 512 KB > probe_jedec: id1 0xbf, id2 0xb6 > Trying Mx29f002, 256 KB > probe_29f002: id1 191, id2 182 > Trying SST29EE020A, 256 KB > probe_jedec: id1 0xbf, id2 0xb6 > Trying SST28SF040A, 512 KB > probe_28sf040: id1 0x25, id2 0xa6 > Trying SST39SF020A, 256 KB > probe_39sf020: id1 0xbf, id2 0xb6 > SST39SF020A found at physical address: 0xfffc0000 > Part is SST39SF020A > > I thought, romimage was burnt on my rom......... > I reboot the system, buf nothing was changed............ > > What's wrong with my procedure..................... > > I did change original rom.............................. > > is it impossible to burn image on the original rom ? > > If so, What should I do? > > Please, give me your wise advice..... > > _________________________________________________________________ > 책상위에 다리 올리고 느긋하게 즐긴다... MSN 온라인 상영관 > http://vod.msn.co.kr > > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios > _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
