i am still trying to get this running:
epia-m + bios savior + dip2plcc adapter + doc millennium 8mbyte
it took quite long until all parts arrived.
anyway. the current problem is that if i plug the dip2plcc adapter
into the bios savior socket epia-m does not boot anymore...
(of course i've written the bios to the bios savior plcc chip before).
that's very strange -- i am going to check the pins of the adapter.
i've 2 adapters. both refuse to work with the board.
maybe this is a high frequency electrical problem...
does someone know in which "speed" the bios is accessed?
niki
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
