Hello from Gregg C Levine I might. The ZIF socket is for easy insertions of the part in question, which you have correctly decided. As for the Atmel part. Good question. I suspect that's the part number the boards are wearing. Not having seen one of them physically, I can only take a guess or three on this subject. First off, do you have the board where you are? Does it run Linux effectively? No complaints, et cetera? Suggest you post the output of the command, "#lspci -v", to this list, and we should be able to advise. (The command is the string after the # mark, the mark is the shell prompt.) ------------------- Gregg C Levine [EMAIL PROTECTED] ------------------------------------------------------------ "The Force will be with you...Always." Obi-Wan Kenobi "Use the Force, Luke."� Obi-Wan Kenobi (This company dedicates this E-Mail to General Obi-Wan Kenobi ) (This company dedicates this E-Mail to Master Yoda )
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Fenner Sent: Monday, September 15, 2003 2:57 PM To: [EMAIL PROTECTED] Subject: DoC on Eipa Hallo, � does anybody have experience with DOC's on an Epia-M board? I read in a previous message ( http://www.mail-archive.com/[EMAIL PROTECTED]/msg03307.html�) that the DOC Millennium 8MB Module MD2802-D08 might work. Can anybody confirm this? � They also say I need a ZIF socket, which makes sense, and an DIP-32 256K X8 120NS Atmel Flash Memory. I don't really understand what I would need that for. � Can anybody help? � Also I read that the EPIA-M still has problems with some DDR-Rams. Does anybody have a list which Rams are supported? � thanks, � Michael _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
