> > the internal vga pci device at 0:12.4 should be found when you write > > 0x80009400 to pci index reg > > 0xcf8. After that the value 0x0504100b should be returned at 0xcfc as vendor > > id (0x100b) and device id (0x0504). > > After single stepping this return value AX is set to 0x4000 and not 0x100b. > > Unfortunaly EAX is not printed: > > > > c000:0124 ed IN EAX,DX > > c000:124 - > > AX=4000 BX=0000 CX=0000 DX=0cfc SP=ffea BP=0000 SI=0000 > > DI=0000 > > DS=0000 ES=c000 SS=0030 CS=c000 IP=0126 NV UP DI PL ZR NA PE > > NC > > > > you're not going to get eax in an 8086. This is an issue. ok this seems to be a fact
> > I wonder if there is an enable for the vga device that we are not setting. I could'nt follow. What do you mean? Bernd _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
