Hi , Have any one can help me?
I used EPIA-M10000 + LinuxBIOS+ Filo 0.4.1 + mkelfImage 1.6 on Red Hat 8.0. I needed VGABIOS to use. But it can't work properly. Serial port msgs show some unknow codes. The POST number is 96. epia config file: # # LinuxBIOS config file for: VIA epia-m mini-itx # target /epia-m # via epia mainboard via/epia-m # Enable Serial Console for debugging option SERIAL_CONSOLE=1 #option SERIAL_POST=1 #option TTYS0_BAUD=115200 option TTYS0_BAUD=57600 option DEFAULT_CONSOLE_LOGLEVEL=9 option DEBUG=1 # Use 256KB Standard Flash as Normal BIOS option RAMTEST=1 option USE_GENERIC_ROM=1 option STD_FLASH=1 option VGABIOS_START=0xfffc0000 option ZKERNEL_START=0xfffd0000 option ROM_SIZE=262144 # FrameBuffer option HAVE_FRAMEBUFFER=1 option SMA_SIZE=16 option CONFIG_VGABIOS=1 option CONFIG_REALMODE_IDT=1 option CONFIG_PCIBIOS=1 option CONFIG_PCIPIOS_IRQ=1 dir src/bioscall # payload size = 192KB option PAYLOAD_SIZE=196608 # use ELF Loader to load Etherboot option USE_ELF_BOOT=1 # Use Filo as our payload payload /vga+filo.bin filo config: # !!! NOTE !!! # Do NOT add spaces or comments at the end of option lines. # It confuses some versions of make. # Image filename for automatic boot and optional command line parameter AUTOBOOT_FILE = "hda2:/vmlinuz.epia root=/dev/hda2 console=tty0 console=ttyS0,57600" # Time in second before booting AUTOBOOT_FILE AUTOBOOT_DELAY = 2 # Driver for hard disk, CompactFlash, and CD-ROM on IDE bus IDE_DISK = 1 # VGA text console VGA_CONSOLE = 1 PC_KEYBOARD = 1 # Serial console SERIAL_CONSOLE = 1 SERIAL_IOBASE = 0x3f8 SERIAL_SPEED = 57600 # Filesystems FSYS_EXT2FS = 1 FSYS_FAT = 1 FSYS_JFS = 1 FSYS_MINIX = 1 FSYS_REISERFS = 1 FSYS_XFS = 1 FSYS_ISO9660 = 1 # Support for boot disk image in bootable CD-ROM (El Torito) ELTORITO = 1 # PCI support SUPPORT_PCI = 1 # Sound support (needs SUPPORT_PCI) SUPPORT_SOUND = 1 # Sound drivers VIA_SOUND = 1 # Debugging DEBUG_ALL = 1 DEBUG_ELFBOOT = 1 DEBUG_ELFNOTE = 1 DEBUG_LINUXBIOS = 1 #DEBUG_MALLOC = 1 DEBUG_MULTIBOOT = 1 #DEBUG_SEGMENT = 1 #DEBUG_SYS_INFO = 1 #DEBUG_TIMER = 1 #DEBUG_BLOCKDEV = 1 DEBUG_PCI = 1 #DEBUG_VIA_SOUND = 1 DEBUG_LINUXLOAD = 1 DEBUG_IDE = 1 #DEBUG_ELTORITO = 1 # i386 options # Loader for standard Linux kernel image, a.k.a. /vmlinuz LINUX_LOADER = 1 # Boot FILO from Multiboot loader (eg. GRUB) MULTIBOOT_IMAGE = 1 # Use PCI Configuration Mechanism #1 (most boards) PCI_CONFIG_1 = 1 ************************************************************ Any suggestion, please tell me. Best regards, Eddy ========================================================== 沒錢換照相手機？快上 eBay 撿便宜 http://edm-prg.epaper.com.tw/click.php?ad_code=31602 ========================================================== PChome交友~~幸福天天有 \*^o^*// http://love.pchome.com.tw/ ========================================================== _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
