yesterday i make my first EPIA-M 10000 rom image.
With the help of Eddy i compile to have VGA and Filo.
In attach you have the output log ....
The problem is :
- LinuxBios tell that the RAM is 127Mbye (and i had 256Mbyte)
- LinuxBios tell that there is no VGA (and i add the VGA bios image in to)
Can someone tell me where i wrong?
Santi Mirenna
INGV - Istituto Nazionale di Geofisica e Vulcanologia
Sezione di Milano
via Bassini 15, 20133 Milano, Italy
tel. +39-02-23699278
fax +39-02-23699458
e mail: [EMAIL PROTECTED]
**********************************************************************************************
Questo messaggio � di carattere riservato ed � indirizzato esclusivamente al
destinatario specificato. L'accesso, la divulgazione, la copia o la diffusione sono
vietate a chiunquealtro ai sensi delle normative vigenti, e possono costituire una
violazione penale. In caso di errore nella ricezione, il ricevente � tenuto a cancel
lare immediatamente il messaggio, dandone conferma al mittente a mezzo e-mail.
This e-mail is confidential and is for the intended recipient only.
Access, disclosure, copying, distribution or reliance on any of it by
anyone else is prohibited and may be a criminal offence.
Please delete if obtained in error and email confirmation to sender.
0 LinuxBIOS-1.0.0 Wed Nov 5 13:09:22 CET 2003 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.0.0 Wed Nov 5 13:09:22 CET 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Scanning PCI bus...PCI: pci_scan_bus for bus 0 PCI: 00:00.0 [1106/3123] PCI: 00:01.0 [1106/b091] PCI: 00:0d.0 [1106/3044] PCI: 00:10.0 [1106/3038] PCI: 00:10.1 [1106/3038] PCI: 00:10.2 [1106/3038] PCI: 00:10.3 [1106/3104] PCI: 00:11.0 [1106/3177] PCI: 00:11.1 [1106/0571] PCI: 00:11.5 [1106/3059] PCI: 00:12.0 [1106/3065] PCI: pci_scan_bus for bus 1 PCI: pci_scan_bus returning with max=01 PCI: pci_scan_bus returning with max=01 done Allocating PCI resources... PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it PCI: 00:00.0 register 10(00000008), read-only ignoring it ASSIGN RESOURCES, bus 0 PCI: 00:01.0 1c <- [0x00001000 - 0x00000fff] bus 1 io PCI: 00:01.0 24 <- [0xfeb00000 - 0xfeafffff] bus 1 prefmem PCI: 00:01.0 20 <- [0xfeb00000 - 0xfeafffff] bus 1 mem PCI: 00:0d.0 10 <- [0xfeb00000 - 0xfeb007ff] mem PCI: 00:0d.0 14 <- [0x00001800 - 0x0000187f] io PCI: 00:10.0 20 <- [0x00001880 - 0x0000189f] io PCI: 00:10.1 20 <- [0x000018a0 - 0x000018bf] io PCI: 00:10.2 20 <- [0x000018c0 - 0x000018df] io PCI: 00:10.3 10 <- [0xfeb01000 - 0xfeb010ff] mem PCI: 00:11.1 20 <- [0x000018e0 - 0x000018ef] io PCI: 00:11.5 10 <- [0x00001000 - 0x000010ff] io PCI: 00:12.0 10 <- [0x00001400 - 0x000014ff] io PCI: 00:12.0 14 <- [0xfeb02000 - 0xfeb020ff] mem ASSIGNED RESOURCES, bus 0 done. Enabling PCI resourcess...PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 cmd <- 07 PCI: 00:0d.0 cmd <- 83 PCI: 00:10.0 cmd <- 01 PCI: 00:10.1 cmd <- 01 PCI: 00:10.2 cmd <- 01 PCI: 00:10.3 cmd <- 02 PCI: 00:11.0 cmd <- 87 PCI: 00:11.1 cmd <- 07 PCI: 00:11.5 cmd <- 01 PCI: 00:12.0 cmd <- 83 done. Initializing PCI devices... PCI devices initialized totalram: 127M Initializing CPU #0 Enabling cache... Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) type: WB DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 64MB, type WB Setting variable MTRR 1, base: 64MB, range: 32MB, type WB Setting variable MTRR 2, base: 96MB, range: 16MB, type WB Setting variable MTRR 3, base: 112MB, range: 8MB, type WB Setting variable MTRR 4, base: 120MB, range: 4MB, type WB Setting variable MTRR 5, base: 124MB, range: 2MB, type WB DONE variable MTRRs Clear out the extra MTRR's call intel_enable_fixed_mtrr() call intel_enableU #0 Initialized Mainboard fixup Final mainboard fixup Southbridge fixup setting firewire Assigning IRQ 10 to 0:d.0 Readback = 10 setting usb Assigning IRQ 11 to 0:10.0 Readback = 11 Assigning IRQ 10 to 0:10.1 Readback = 10 Assigning IRQ 12 to 0:10.2 Readback = 12 Assigning IRQ 5 to 0:10.3 Readback = 5 setting ethernet Assigning IRQ 11 to 0:12.0 Readback = 11 setting pci slot setting vt8235 slot Assigning IRQ 5 to 0:11.1 Readback = 5 Assigning IRQ 12 to 0:11.5 Readback = 12 INSTALL REAL-MODE IDT DO THE VGA BIOS NO VGA FOUND Checking IRQ routing tables... /lb/freebios/src/arch/i386/lib/pirq_routing.c: 30:check_pirq_routing_table() - irq_routing_table located at: 0x00009240 done. Copying IRQ routing tables tClearing Segment: addr: 0x000000000010d068 memsz: 0x000000000001a0a8 Loading Segment: addr: 0x0000000000127120 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x109554 FILO version 0.4.1 ([EMAIL PROTECTED]) Wed Nov 5 12:57:20 CET collect_elfboot_info: Version: 1.2 malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks) collect_linuxbios_info: Searching for LinuxBIOS tables... find_lb_table: Found canidate at: 00000500 find_lb_table: header checksum o.k. find_lbnt location: 0x100000-0x127167 relocate: Relocating to 0x7ed8e90-0x7effff7... ok setup_timers: CPU 1000 MHz pci_init: Scanning PCI: found 11 devices malloc_diag: alloc: 240 bytes (4 blocks), free: 16136 bytes (1 blocks) pci_init: 00:00.0 1106:3123 06.2 1106:3038 0c03 00 pci_init: 00:10.3 1106:3104 0c03 20 pci_init: 00:11.0 1106:3177 0601 00 pci_init: 00:11.1 1106:0571 0101 8a pci_init: 00:11.5 1106:3059 0401 00 pci_init: 00:12.0 1106:3065 0200 00 No sound device found Press <Enter> for default 1 timed out boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200 malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks) malloc_diag: alloc: 328 bytes (6 blocks), free: 16048 bytes (1 blocks) file_open: dev=hda1, path=/vmlinuz find_ide_controller: found PCI IDE controller 1106:0571 prog_if=0x8a find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=39102336 init_drive: Init device params... ok hda: LBA 20GB: ST320011A devopen: Partition 1 start 63 length 208782 Mounted ext2fs malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 328 bytes (6 blocks), free: 16048 bytes (1 blocks) file_open: dev=hda1, path=/vmlinuz devopen: already open malloc_diag: alloc: 312 bytes (5 blocks), free: 16064 bytes (1 blocks) Found Linux version 2.4.19-CWLINUX_4 ([EMAIL PROTECTED]) #1 Tue Sep 17 19:33:00 HKT 2002 (protocol 0x203) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 00000000000006c0 - 00000000000a0000 set_memory_size: 0000000000100000 - 0000000007f00000 set_memory_size: ramtop=0x7f00000 set_memory_size: ext_mem_k=64512, alt_mem_k=129024 parse_command_line: original command line: "root=/dev/hda1 console=tty0 console=ttyS0,115200" parse_command_line: kernel command line at 0x91000 parse_command_line: kernel command line (48 bytes): "root=/dev/hda1 console=tty0 console=ttyS0,115200" load_linux_kernel: offset=0x1600 addr=0x100000 size=0xfc525 Loading kernel... ok start_linux: eip=0x100000 Jumping to entry point... Linux version 2.4.19-CWLINUX_4 ([EMAIL PROTECTED]) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 Tue Sep 17 19:33:00 HKT 2002
BIOS-provided physical RAM map: BIOS-e820: 00000000000006c0 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 0000000007f00000 (usable) 127MB LOWMEM available. hm, page 00000000 reserved twice. Advanced speculative caching feature not present On node 0 totalpages: 32512 zone(0): 4096 pages. zone(1): 28416 pages. zone(2): 0 pages. Kernel command line: root=/dev/hda1 console=tty0 console=ttyS0,115200 No local APIC present or hardware disabled Initializing CPU#0 Detected 999.542 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1992.29 BogoMIPS Memory: 125616k/130048k available (1130k kernel code, 4044k reserved, 958k data, 124k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. kdb version 2.3 by Scott Lurndal, Keith Owens. Copyright SGI, All Rights Reserved Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Centaur VIA Nehemiah stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd VFS: Disk quotas vdquot_6.5.1 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <[EMAIL PROTECTED]> hda: C/H/S=0/0/0 from BIOS ignored hda: ST320011A, ATA DISK drive hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide0: probed IRQ 14 failed, using default. ide1 at 0x170-0x177,0x376 on irq 15 ide1: probed IRQ 15 failed, using default. hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63 ide-floppy driver 0.99.newide Partition check: hda: [PTBL] [2434/255/63] hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.99.newide IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 124k freed Warning: unable to open an initial console. Kernel panic: No init found. Try passing init= option to kernel. Entering kdb (current=0xc11d8000, pid 1) due to panic kdb> kdb> kdb> eerrf eerrf = 0x000000ee kdb> eerrf = 0x000000ee kdb>
