* Devi Priya <[EMAIL PROTECTED]> [031119 14:42]:
> Hi,
> RAMBASE address is given as 0x4000. Then if it is the lowest RAM
> address used by linuxbios. Is it right? If so the memory sizing in
> freebios/src/northbridge/raminit.inc is done based on address 0. The lower
> address ic 0 or 0x4000. I have an 32 MB SDRAM anf 4MB flash memory. Then in
> hardware, the SDRAM must be mapped from 0x0000000-0x1FFFFFF and Flash
> memory from 0xFFFFFFFF-0xFFC00000. Am i right at this point? Plz give me
> suggestion on this.
Is the flash 4 MBit or 4 MByte? What part are you using?
Yes your assumption sounds right, if your part is really 4MByte, which
is doubtable. But I still don't exactly recognize your problem..
Best regards,
Stefan Reinauer
--
Stefan Reinauer, SUSE LINUX AG
Teamleader Architecture Development
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
