Thanks Niki, It look almost the same as mine. Appreciate if you can send me working image so I can narrow down the problem. Dmitry/
----- Original Message ----- From: "Niki Waibel" <[EMAIL PROTECTED]> To: "Dmitry Borisov" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Friday, November 21, 2003 5:20 AM Subject: Re: EPIA-M 600 Cannot start > i am using a epia-m 600 with success. > current cvs of freebios/linuxbios version1 works fine. > > i used: > === > $ cat ../example.config | grep -v ^# | grep -v ^$ > target /home/niki/packages/freebios-20031024-build > mainboard via/epia-m > option SERIAL_CONSOLE=1 > option TTYS0_BAUD=115200 > option DEFAULT_CONSOLE_LOGLEVEL=9 > option DEBUG=1 > option RAMTEST=1 > option USE_GENERIC_ROM=1 > option STD_FLASH=1 > option ROM_SIZE=262144 > option PAYLOAD_SIZE=196608 > option USE_ELF_BOOT=1 > payload /home/niki/packages/filo-0.4/filo.elf > === > > there is currently a problem with the speed of the serial port. > it might be a baudrate less (in my case it is 57600 although i > specified 115200). > > i can send you my romimage for testing if you want. > > gcc: 3.3.1 > binutils: 2.14 > (should not matter) _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
