YhLu <[EMAIL PROTECTED]> writes: > Ron, > > Please check in the Tyan s2850/2880/2881/2882/4880 updates into the CVS > Tree. > > 1. northbridge/amd/amdk8/raminit.h: change uint8_t to uint16_t
This is quite reasonable. > 2. southbridge/amd/amd8111/amd8111_early_smbus.c: update smbus_write_byte > 3. southbridge/amd/amd8131/amd8131_bridge.c: update ioapic_anable to enable > PCI-X MASTER Mode. Why is this necessary? Previously it has been the policy to not set the master enables any more than is necessary for proper operation of the devices. Unless I am mistaken not setting the master enables is very much in spec for pci devices. > 4. other in /src/mainboard/tyan/ and /targets/tyan > > Stefan, > With update 1 and 2, you can get ride of FAKE_SPD_ROM. You need to change > some lines in auto.c for quartet. 1. I2C HUB address: 0x30 --> 0x18, 2. > RC0-> (1<<1)<<8, RC1-> (1<<2)<<8, RC2-> (1<<3)<<8, RC3-> (1<<4)<<8. Looking at the diffstat output you also touched the quartet/Config.lb and removed the FAKE_SPD define. Has this been tested? There is a context diff included in tyan/s2881/lyh.txt that does not look like it needs to be there. And of course there were all kinds of binary roms that the diff did not include. Eric _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
