Stefan Reinauer <[EMAIL PROTECTED]> writes: > * Stefan Reinauer <[EMAIL PROTECTED]> [040322 18:01]: > > Link is up at 1000 Mbps, full duplex. TX RX flow control > > ..Me: 192.168.0.2, Server: 192.168.0.1 > > Loading 192.168.0.1:kernel.elf ...(ELF)... ........... [..] ......done > > Firmware type: LinuxBIOS > > Also, I could not get beyound this point with a Linux 2.6.5rc1 kernel. > Linux 2.4.x boots through to userland... It looks like a kernel issue, > but could it come from mkelfImage?
Possibly. Either that or you got hit with the changes to the 2.6.x config option changes. I have booted a 2.6 kernel. So unless it is a very recent change things should still work. Have you tried memtest86? I am quite curious to if your memory is working solidly. With all of your bootloaders going haywire I really don't know what to think. This might be a glitch in 5.3.recent as well. I have not looked in detail at what is going on there. I can't think of anything that would cause a failure like that. Eric _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
