The optimize_link make The link CPU0 to CPU1: in CPU0 side(link0) is 16x800 and CPU1 side(link0) is 16x800
but the scan_ht_chain change CPU0 side(link0) is 16x600 it must think it is connected to 8111 or something. YH. -----邮件原件----- 发件人: YhLu 发送时间: 2004年3月24日 9:56 收件人: Stefan Reinauer 抄送: [EMAIL PROTECTED] 主题: 答复: ????: coherent_ht_mainboard() The CPU0->AMD8131->AMD8111 is right. The link CPU0 to CPU1: in CPU0 side(link0) is 16x600 and CPU1 side(link0) is 16x800 All others is 8x200. The coherent should be all 16x1000 I will try your patch and dig it out. Regards YH. -----邮件原件----- 发件人: Stefan Reinauer [mailto:[EMAIL PROTECTED] 发送时间: 2004年3月24日 9:37 收件人: YhLu 抄送: [EMAIL PROTECTED] 主题: Re: ????: coherent_ht_mainboard() * YhLu <[EMAIL PROTECTED]> [040324 18:39]: > The dynamic code does not work on 4 way MB, I have found out why the s4882 > can not soft_reset. > > The HT-link between is not properly init properly. Which link is this? CPU0->AMD8111? I seemed to have no problems on quartet with 1.1.5, which is 4 way as well. Have you been able to track the problem down to a certain function/flaw? > If the dynamic code can init the coherent-ht properly, We can remove > hypertransport.c good. Stefan -- Stefan Reinauer, SUSE LINUX AG Head of Architecture Development _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
