Oops, it's not LPC compatible :( Ollie says we need a really old mainboard to flash it.
Or perhaps MTD would work? On Fri, 26 Mar 2004, John Laur wrote: > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:linuxbios- > > [EMAIL PROTECTED] On Behalf Of Hendricks David W. > > Sent: Friday, March 26, 2004 11:49 AM > > To: John Laur > > Cc: [EMAIL PROTECTED] > > Subject: Re: EPIA-M "Magic Potion"? > > > > What is the model/part number on your flash? It *might* work with the > code > > already in flash_and_burn, but we might need to add a device id or > > something. > > > > You will have to forgive me; I am still pretty green with this whole > thing. Which model/part number do you need exactly? I have included some > information here, but if you need to know something else, please just > let me know, and I'll be happy to provide it. > > I am using an RD1-PL Bios Savior with the original BIOS chip in the > socket. Flash_rom recognizes neither the original BIOS nor the backup > flash part (I don't know exactly what chip the RD1-PL uses offhand.) > > When the RD1 is switched to the ORG (original bios), AWFLASH.EXE reports > the following: > > For VT8623-8235-CLE26I01C-00 DATE: 12/11/2003 > Flash Type - SST 39SF020 /5V > > The actual chip says on it: > > SST > MPF > 39SF020A > 70-4C-NH > 0219037-A > > Here is the output of my lspci -vvn for the southbridge (00:11.0 ISA > bridge: VIA Technologies, Inc. VT8235 ISA Bridge): > > 00:11.0 Class 0601: 1106:3177 > Subsystem: 1106:aa01 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Here is what flash_rom returns. As you can see it's probing for the > SST29SF020A, which is what I have, and failing: > > m3:~/freebios/util/flash_and_burn# setpci -s 0:11.0 40.b=54 > > m3:~/freebios/util/flash_and_burn# ./flash_rom > Calibrating timer since microsleep sucks ... takes a second > Setting up microsecond timing loop > 199M loops per second > OK, calibrated, now do the deed > Enabling flash write on VT8235...OK > Trying Am29F040B, 512 KB > probe_29f040b: id1 0xff, id2 0xff > Trying At29C040A, 512 KB > probe_jedec: id1 0xff, id2 0xff > Trying Mx29f002, 256 KB > probe_29f002: id1 37, id2 0 > Trying SST29EE020A, 256 KB > probe_jedec: id1 0x25, id2 0x0 > Trying SST28SF040A, 512 KB > probe_28sf040: id1 0xff, id2 0xff > Trying SST39SF020A, 256 KB > probe_39sf020: id1 0x25, id2 0x0 > Trying SST39VF020, 256 KB > probe_39sf020: id1 0x25, id2 0x0 > Trying W29C011, 128 KB > probe_jedec: id1 0x68, id2 0x5b > Trying W29C020C, 256 KB > probe_jedec: id1 0x25, id2 0x0 > Trying W49F002U, 256 KB > probe_49f002: id1 0x25, id2 0x0 > Trying M29F400BT, 512 KB > probe_m29f400bt: id1 0xff, id2 0xff > Trying 82802ab, 512 KB > probe_82802ab: id1 0xff, id2 0xff > Trying 82802ac, 1024 KB > probe_82802ab: id1 0xff, id2 0xff > Trying MD-2802 (M-Systems DiskOnChip Millennium Module), 8 KB > probe_md2802: > probe_md2802: ******************************* > probe_md2802: * THIS IS A PRE ALPHA VERSION * > probe_md2802: * IN THE DEVELOPEMENT ********* > probe_md2802: * PROCESS RIGHT NOW. ********** > probe_md2802: ******************************* > probe_md2802: * IF YOU ARE NOT A DEVELOPER ** > probe_md2802: * THEN DO NOT TRY TO READ OR ** > probe_md2802: * WRITE TO THIS DEVICE ******** > probe_md2802: ******************************* > probe_md2802: > probe_md2802: switching off reset mode ... > probe_md2802: switching off reset mode ... done > probe_md2802: > probe_md2802: switching off write protection ... > probe_md2802: switching off write protection ... done > probe_md2802: > probe_md2802: IPL_0x0000: 0x41 > probe_md2802: IPL_0x0001: 0x77 > probe_md2802: IPL_0x0002: 0x61 > probe_md2802: IPL_0x0003: 0x72 > probe_md2802: > probe_md2802: ChipID: 0x0e > probe_md2802: DOCStatus: 0x17 > probe_md2802: FloorSelect: 0x01 > probe_md2802: CDSNControl: 0xeb > probe_md2802: CDSNDeviceSelect: 0x2c > probe_md2802: ECCConfiguration: 0xf6 > probe_md2802: CDSNSlowIO: 0x2e > probe_md2802: ECCSyndrome0: 0x01 > probe_md2802: ECCSyndrome1: 0x86 > probe_md2802: ECCSyndrome2: 0xc4 > probe_md2802: ECCSyndrome3: 0x8b > probe_md2802: ECCSyndrome4: 0x1e > probe_md2802: ECCSyndrome5: 0x1c > probe_md2802: AliasResolution: 0x83 > probe_md2802: ConfigurationInput: 0xc3 > probe_md2802: ReadPipelineInitialization: 0x02 > probe_md2802: LastDataRead: 0x1e > probe_md2802: > probe_md2802: checking ECCConfiguration toggle bit > probe_md2802: 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 > probe_md2802: toggle result: 5/5 > EEPROM not found > > Thank you, everyone for all the help. Hopefully, I can get this thing > figured out eventually. > > John > > > On Fri, 26 Mar 2004, John Laur wrote: > > > 2) I cannot for the life of me flash the BIOS under Linux. For now, > I > > > have to reboot to a DOS floppy and flash the original BIOS, then > reboot > > > again and flash the LinuxBIOS image (AWFLASH will for some reason > not > > > flash a LinuxBIOS image over a LinuxBIOS image already on the flash > > > part) I have run 'setpci -s 0:11.0 40.b=54' as described in the > docs > > > and on the mailing list, but flash_rom still detects no flash > device. > > > > _______________________________________________ > > Linuxbios mailing list > > [EMAIL PROTECTED] > > http://www.clustermatic.org/mailman/listinfo/linuxbios > > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios > _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
