Good, I will pack the code into tar and send to you.
Regards YH -----éäåä----- åää: Steven James [mailto:[EMAIL PROTECTED] åéæé: 2004å5æ10æ 15:57 æää: YhLu æé: Gregg C Levine; Linuxbios äé: Re: çå: New problems with building Baremetal Greetings, Actually, it is my own implementation, though I did use the 2.4.x kernel's uhci.c as a guide. I couldn't use that as is since it had a good many kernel dependencies and was interrupt driven. I did have it loading as a module at one point to test things. If you want, I can get a machine here set up and test/debug your merge. G'day, sjames -------------------------steven james, director of research, linux labs ... ........ ..... .... 230 peachtree st nw ste 2701 the original linux labs atlanta.ga.us 30303 -since 1995 http://www.linuxlabs.com office & fax 866.545.6306 ----------------------------------------------------------------------- On Mon, 10 May 2004, YhLu wrote: > Steven, > > The uhci.c is from 2.4.22 or 2.6.5? > > I merged your code into FILO in Etherboot, but at last I found that the USB > in AMD8111 is ohci. And I can not debug uhci now. > > Regards > > YH > > -----éäåä----- > åää: Steven James [mailto:[EMAIL PROTECTED] > åéæé: 2004å5æ10æ 12:55 > æää: Gregg C Levine > æé: Linuxbios > äé: Re: New problems with building Baremetal > > Greetings, > > In the lib directory, try removing ide.o from DEPS for now. That should > get the library to compile. > > The rest is all warnings except at the end where it can't link against > libbaremetal.a > > G'day, > sjames > > > -------------------------steven james, director of research, linux labs > ... ........ ..... .... 230 peachtree st nw ste 2701 > the original linux labs atlanta.ga.us 30303 > -since 1995 http://www.linuxlabs.com > office & fax 866.545.6306 > ----------------------------------------------------------------------- > > > On Mon, 10 May 2004, Gregg C Levine wrote: > > > Hello from Gregg C Levine > > Now something else has happened. I've managed to build a copy of GCC > > version 2.9.5.3 and have it installed in the /opt directory. But > > there are unusual problems in the building of the bare metal library, > > here's a script output regarding the errors: > > Script started on Mon May 10 14:47:28 2004 > > [EMAIL PROTECTED]:/usr/src/lobos/freebios/util/baremetal/lib# make > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c > > ../../../src/lib/printk.c > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c -o > > serial_subr.o serial_subr.c > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c -o > > subr.o subr.c > > In file included from subr.c:16: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c > > ../../../src/lib/vsprintf.c > > In file included from ../../../src/lib/vsprintf.c:18: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c > > ../../../src/lib/memcpy.c > > In file included from ../../../src/lib/memcpy.c:1: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c > > ../../../src/lib/malloc.c > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c > > ../../../src/lib/memset.c > > In file included from ../../../src/lib/memset.c:1: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c > > ../../../src/lib/compute_ip_checksum.c > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c -o > > elfboot.o elfboot.c > > In file included from elfboot.c:8: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c -o > > boot.o boot.c > > In file included from boot.c:4: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -c > > ../../../src/pc80/ide/ide.c > > ../../../src/pc80/ide/ide.c:27: delay.h: No such file or directory > > ../../../src/pc80/ide/ide.c:28: pci.h: No such file or directory > > make: *** [ide.o] Error 1 > > [EMAIL PROTECTED]:/usr/src/lobos/freebios/util/baremetal/lib# exit > > Script done on Mon May 10 14:47:36 2004 > > > > Obviously some of those errors can be corrected by reminding the make > > file to find the include files that GCC 2.95.3 prefers. But the ones > > that concern me, are the "missing files" for the IDE issues. > > > > And here's the latest problem with the USB attachment to bare metal: > > Script started on Mon May 10 14:49:02 2004 > > [EMAIL PROTECTED]:/usr/src/lobos/freebios/util/baremetal/usb# make > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -DDEBUG > > -DZKERNEL_START=0xfff00000 -c -o uhci.o uhci.c > > uhci.c:332: warning: `USBCMD' redefined > > uhci.h:290: warning: this is the location of the previous definition > > uhci.c:333: warning: `USBSTS' redefined > > uhci.h:291: warning: this is the location of the previous definition > > uhci.c:334: warning: `USBINTR' redefined > > uhci.h:292: warning: this is the location of the previous definition > > uhci.c:335: warning: `FRNUM' redefined > > uhci.h:293: warning: this is the location of the previous definition > > uhci.c:336: warning: `FLBASE' redefined > > uhci.h:294: warning: this is the location of the previous definition > > uhci.c:337: warning: `SOFMOD' redefined > > uhci.h:295: warning: this is the location of the previous definition > > uhci.c:338: warning: `PORTSC1' redefined > > uhci.h:296: warning: this is the location of the previous definition > > uhci.c:339: warning: `PORTSC2' redefined > > uhci.h:297: warning: this is the location of the previous definition > > uhci.c: In function `ctrl_msg': > > uhci.c:776: warning: assignment makes pointer from integer without a > > cast > > uhci.c: In function `hub_port_reset': > > uhci.c:1193: warning: passing arg 1 of `dump_hex' from incompatible > > pointer type > > uhci.c: In function `usb_hub_init': > > uhci.c:1272: warning: assignment makes pointer from integer without a > > cast > > uhci.c: In function `configure_device': > > uhci.c:1383: warning: passing arg 1 of `dump_config_descriptor' from > > incompatible pointer type > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -DDEBUG > > -DZKERNEL_START=0xfff00000 -c -o usb_scsi_low.o usb_scsi_low.c > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -DDEBUG > > -DZKERNEL_START=0xfff00000 -c -o debug.o debug.c > > In file included from debug.c:31: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -DDEBUG > > -DZKERNEL_START=0xfff00000 -c -o scsi_cmds.o scsi_cmds.c > > In file included from scsi_cmds.c:26: > > /usr/include/sys/types.h:152: warning: redefinition of `ushort' > > uhci.h:13: warning: `ushort' previously declared here > > scsi_cmds.c: In function `ll_read_block': > > scsi_cmds.c:258: warning: passing arg 2 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `ll_write_block': > > scsi_cmds.c:280: warning: passing arg 2 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `ll_read_long': > > scsi_cmds.c:311: warning: passing arg 2 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `get_capacity': > > scsi_cmds.c:328: warning: passing arg 5 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `query': > > scsi_cmds.c:349: warning: passing arg 5 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `ReportLUNS': > > scsi_cmds.c:372: warning: passing arg 5 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `ReportOpCodes': > > scsi_cmds.c:423: warning: passing arg 2 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c:423: warning: passing arg 5 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `CheckVolumes': > > scsi_cmds.c:469: warning: passing arg 2 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `CheckPartitions': > > scsi_cmds.c:494: warning: passing arg 2 of `scsi_command' from > > incompatible pointer type > > scsi_cmds.c: In function `UnitReady': > > scsi_cmds.c:514: warning: passing arg 2 of `scsi_command' from > > incompatible pointer type > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -DDEBUG > > -DZKERNEL_START=0xfff00000 -c -o pci_util.o pci_util.c > > /opt/gcc-2.95.3/bin/gcc -I ../include -I ../include/i386 -O2 -DDEBUG > > -DZKERNEL_START=0xfff00000 -c -o block_fill_inbuf.o > > block_fill_inbuf.c > > In file included from block_fill_inbuf.c:8: > > ../include/string.h:9: warning: conflicting types for built-in > > function `strcpy' > > make: *** No rule to make target `../lib/baremetal.a', needed by > > `usbboot.elf'. Stop. > > [EMAIL PROTECTED]:/usr/src/lobos/freebios/util/baremetal/usb# exit > > Script done on Mon May 10 14:49:10 2004 > > > > Again I expect that by instructing the make file to use the include > > files supplied by GCC 2.95.3, that most of the errors will be gone, > > but I'm listing those for reference. > > ------------------- > > Gregg C Levine [EMAIL PROTECTED] > > ------------------------------------------------------------ > > "The Force will be with you...Always." Obi-Wan Kenobi > > "Use the Force, Luke."Â Obi-Wan Kenobi > > > > > > _______________________________________________ > > Linuxbios mailing list > > [EMAIL PROTECTED] > > http://www.clustermatic.org/mailman/listinfo/linuxbios > > > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios > _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
