Are your changes in CVS server? You need to enable CONFIG_BTEXT_CONSOLE
-----邮件原件----- 发件人: Li-Ta Lo [mailto:[EMAIL PROTECTED] 发送时间: 2004年5月6日 14:52 收件人: YhLu 抄送: Hendricks David W.; LinuxBIOS 主题: Re: 答复: 答复: Which kernel for framebuffering? On Thu, 2004-05-06 at 15:59, YhLu wrote: > So the IBM MB does't work again? > Can not get output in CRT or sth? > When I checked with David yesterday, it didn't. There is nothing on the screen even for FILO. I think it is due to different HT topology. Ollie > YH > > -----邮件原件----- > 发件人: Li-Ta Lo [mailto:[EMAIL PROTECTED] > 发送时间: 2004年5月6日 14:46 > 收件人: YhLu > 抄送: Hendricks David W.; LinuxBIOS > 主题: Re: 答复: Which kernel for framebuffering? > > On Wed, 2004-05-05 at 13:39, YhLu wrote: > > did you do anything with the LDT/Resource for VGA Card ? We have problem > on the IBM/e325 which has different HT topology with hdama. > > Ollie > > > > > Worked nicely :) The keyboard worked at FILO, but did not work after the > > kernel booted. It didn't even show IRQ 1 in /proc/interrupts. Weird, but I > > > guess that's another matter. I'm just very, very happy to see Linux boot > > into a console I can see on a real monitor :) > > > > On Tue, 4 May 2004, YhLu wrote: > > > > > David, > > > > > > Please refer to the patch for 2.4.22 and 2.6.5, or you can put that in > CVS > > > ... > > > > > > Also please refer to the matix to see which kernel you want to use. > > > > > > Please make sure enable ati xl framebuffer only in kernel config. ( > don't > > > enable noinit) > > > > > > Regards > > > > > > YH > > > > > _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
