You can use GPIO from AMD8111 and SuperIO Winbond 86327hf. But you need to check which pin can be linked out.
Regards YH -----Original Message----- From: Jay Miller [mailto:[EMAIL PROTECTED] Sent: Friday, July 23, 2004 1:45 PM To: [EMAIL PROTECTED] Subject: AMD 8111 GPIO We've got Linux up and running on our Tyan S2885 motherboards, using etherboot and filo with USB support. Thanks for all your help, and patience! I was hoping that with all the expertise here with AMD 8111 chipset, that someone would be able to answer my question. Although it's not strictly LinuxBIOS, it is Linux. ;-) So I'm trying to write a Linux driver for the GPIO pins on the AMD 8111. I saw a comment in amd8111_smbus.c that PMIOEN is set. I believe this is part of what I need to be able to drive the GPIOs. But how/where were all those hex values determined? The spec uses mnemonics to abstract the addresses, and I don't see how they correlate. Thanks, Jay Miller 781-229-7812x117 Actuality Systems, Inc. [EMAIL PROTECTED] _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
