|
I
am trying to build and run a romimage for tyan s2850: Hardware: No
disks Superio
: w83627hf Ethernet:
broadcom It
looks like the default mainboard configuration. In
order to start I wanted to build only the normal image. Only to see some output
in the console. I
made the following changes in Config.lb: * put the romimage "fallback"
statement in comment. * FALLBACK_SIZE =0. * HAVE_FALLBACK_BOOT = 0 * remove "fallback from build: buildrom ./linuxbios.rom ROM_SIZE "normal" * Use filo boot. I
built the romimage, burn it and the console doesn't show output. The
problem is not in the cable. What
am I doing wrong ? Thanks, Sagiv |
- Re: building romimage for tyan s2850 mainboard Sagiv Yefet
- Re: building romimage for tyan s2850 mainboard Stefan Reinauer
- Re: building romimage for tyan s2850 mainboard Stefan Reinauer
