On board and add-on card, there is some difference. I just noticed Ati ragexl init in LinuxBIOS only support Onboard device. And does not support addon card.
But the ragexl init in Kernel can support both. Regards YH -----Original Message----- From: Stefan Reinauer [mailto:[EMAIL PROTECTED] Sent: Friday, October 01, 2004 10:59 AM To: Richard Smith Cc: [EMAIL PROTECTED] Subject: Re: PCI guru consultant needed * Richard Smith <[EMAIL PROTECTED]> [041001 18:47]: > Somehow the SDRAM inside the M1 chip is failing to initialize properly. > The video output has all the right VSYNC and HSYNC for the 800x600 > mode I setup but a black screen and a large square block for the cursor. > If I exit X and try to write/read a value into video ram I get garbage > back. This works on the Ausu P2B. Wild guess: - Timing issues? - missing bridge initialization? Stefan _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
