That should be kernel 2.6 bug under 64bit: the last 4k near 4G can not be accessed when 4G RAM installed.
Regards YH -----Original Message----- From: Li-Ta Lo [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 03, 2004 9:10 AM To: Ronald G. Minnich Cc: Donald Zoch; Hendricks David W.; LinuxBIOS Subject: Re: flash_rom on SST49LF004B tips? On Wed, 2004-11-03 at 09:53, Ronald G. Minnich wrote: > On Mon, 1 Nov 2004, Donald Zoch wrote: > > > I'm trying to get the flash_rom program working on the SST49LF004B. > > This is the part that is coming in our newer Arima HDAMA boards that > > replaces the SST49LF040. It has the same id as the SST49LF004A, > > but is different in that when we first started trying to flash it, the > > flash looked like it worked but would never verify. I took a look > > at the data sheet and from the looks of it there are these block locking > > registers that the zero bit must be cleared in in order to write to > > certain parts of the flash. At least that's why I think it's not > > flashing. > > I did a part like that already, the sst 49lf008a. > > Look in flash_rom. It works fine. > BTW, there is some unknown proble to flash some SST flash in 64-bit mode. I have no idea why. It works perfectly in 32-bit mode. Ollie > ron > _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
