Amdk8_scan_chains will clear E0... E8 at first. YH
-----Original Message----- From: Liu Tao [mailto:[EMAIL PROTECTED] Sent: Friday, November 05, 2004 12:26 AM To: YhLu Cc: Eric W. Biederman; LinuxBIOS Subject: Re: Board hangs after soft_reset() in auto.c YhLu wrote: >Which stage auto.c >E0: 0xff010003 --> 0x06000003 >E4: 0x09070103 --> 0x09070103 >E8: --> 0x0c0a0203 > >YH In auto.c setup_myboard_resource_map(): E0: <- 0x06000003 E4: <- 0x09070103 E8: <- 0x0c0a0203 then in C part amdk8_scan_chains(): E0: <- 0xff010003 (max=0) /* E0 overlaps E4/E8 ? */ max = hypertransport_scan_chain(link0, max); E0: <- 0x06010003 (imagin max=0x6) E4: <- 0xff070003 /* E4 overlaps E8 ? */ max = hypertransport_scan_chain(link1, max); E4: <- 0x09070003 (imagin max=0x9) E8: <- 0xff0a0003 max = hypertransport_scan_chain(link2, max); E8: <- 0x0c0a0003 (imagin max=0xc) Regards, Liu Tao _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
