Enable apic ext id committed.
Changes
Auto.c
nodeid = lapicid() & 0xf;
#if ENABLE_APIC_EXT_ID == 1
enable_apic_ext_id(nodeid);
lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) |
(APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10
#endif
if (cpu_init_detected(nodeid)) {
asm volatile ("jmp __cpu_reset");
}
distinguish_cpu_resets(nodeid);
also reset_test.c
change cpu_init_detected and distinguish_cpu_resets to take node id.
YH
-----Original Message-----
From: Ronald G. Minnich [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 04, 2005 7:29 AM
To: Stefan Reinauer
Cc: linuxbios@clustermatic.org
Subject: Re: mptable.c
On Tue, 4 Jan 2005, Stefan Reinauer wrote:
> I can have a look, if you can point me to some documentation. Is the
> utility supposed to through out a working mptable? The code it creates
> looks fundamentally different from the opteron boards' mptables.c
> versions.
It will toss out C code with the proper options. It's been so long since
anyone has used it that I don't remember how to run it!
ron
_______________________________________________
Linuxbios mailing list
Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
_______________________________________________
Linuxbios mailing list
Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
