Dear Mr. Li-Ta Lo,
I´ve access only to the svn respository. I think don´t have access to the developer web site and docs there. I have both boards based on GX and LX processors. I will do the tests. Thanks for the attention. Jardel. -----Mensagem original----- De: Li-Ta Lo [mailto:[EMAIL PROTECTED] Enviada em: quinta-feira, 23 de fevereiro de 2006 18:44 Para: Jardel Silveira Cc: 'Ronald G Minnich'; [email protected] Assunto: Re: [LinuxBIOS] RES: Rumba target and AMD RDK THINCLIENT On Wed, 2006-02-22 at 15:12 -0300, Jardel Silveira wrote: > Dear, > > > As a matter of fact, this target doesn´t seem to turn on my board. > The power led is off. > I´ve an FS2 JTAG interface and may be I can do some necessary tests. > I just committed the raminit.c for GX2. Please take a look at it. I presume you have access to the developer web site and docs there? I think I have implemented the DRAM init sequence in their GeodeROM Porting Guide and LX/GX processor data book correctly. But I may be wrong. I also thing probably I have to implement the PLL reset in order for DRAM to work. BTW, hook a serial console. I think the power led is controlled by software. It is off all the way in LinuxBIOS (yes, there is something on the serial console.) -- Li-Ta Lo <[EMAIL PROTECTED]> Los Alamos National Lab -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
