Hello all, my target: VIA EPIA-M 10000
Latest linuxbios (rev 2177) I extracted the VIA VGA BIOS from the EPIA running official BIOS rev. 1.13. However, my X server reports: VIA(0): Bad V-BIOS checksum. Everything before that looks good. Upon boot, I *do* get VGA output of FILO. Would could be the cause? See below for details on what I did. Regards, Leon. ---<sidenote>--- As a sidenote, I think the HOWTO/EPIA-M is wrong about how to extract: WRONG: dd if=/dev/mem of=/video.bios.bin \ WRONG: bs=1 count=65536 skip=790528 Note that 790528=0xC1000 and 65536=0x10000 /dev/mem must be read from 0xC000-0xD000 (VGA BIOS), whereas /proc/kcore must be read from 0xC1000-0xD1000 because kcore is an ELF 'view' to the memory, with a 0x1000 ELF header at 0xC000. What I did is extract from 0xC000-0xD000 as follows: dd if=/dev/mem of=/113mem.bin skip=1536 count=128 (bs=512 by default) ---</sidenote>--- [EMAIL PROTECTED]:/$ ls -ald /113mem.bin -rw-r--r-- 1 root root 65536 2006-02-23 03:57 /113mem.bin [EMAIL PROTECTED]:/$ hexdump -C /113mem.bin | head -n 10 00000000 55 aa 7d e9 26 7f 5e 1b fa f9 f4 82 00 00 00 00 |U.}.&.^.........| 00000010 00 00 00 00 00 00 00 00 44 00 d4 b0 c6 00 49 42 |........D.....IB| 00000020 4d 20 43 4f 4d 50 41 54 49 42 4c 45 42 43 50 4f |M COMPATIBLEBCPO| 00000030 53 54 00 00 18 00 30 34 2f 31 38 2f 30 33 01 15 |ST....04/18/03..| 00000040 00 c0 c6 00 50 43 49 52 06 11 22 31 00 00 18 00 |....PCIR.."1....| 00000050 00 00 00 03 40 00 51 01 00 80 00 00 00 01 20 20 |[EMAIL PROTECTED] | 00000060 20 56 49 41 20 54 65 63 2e 49 6e 63 2e 20 20 20 | VIA Tec.Inc. | 00000070 20 20 20 20 20 20 20 20 20 56 45 52 2e 56 54 33 | VER.VT3| 00000080 31 32 33 20 20 20 20 01 15 01 12 56 49 41 20 20 |123 ....VIA | 00000090 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 00 | ....| [EMAIL PROTECTED]:/$ md5sum /113mem.bin 87017abc14c53e51a269fe59b5ba1508 /113mem.bin -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
