Hello all, Stefan Reinauer wrote: > * Leon Woestenberg <[EMAIL PROTECTED]> [060224 13:25]: > >> Sure, I do, for both the AMD and ST part. >> >> But I do not have the time to fully cross-reference it against all >> timing specs though. >> > > That part is uncritical. Make sure the block layout is the same. There > are different parts that have a "boot block" in the top (T) or bottom > (b) of the address range. > > When you test flashing on your system and it works, everything except > the block sizes will be ok. > > I checked and can confirm that both parts use eight uniform erase blocks of 64kByte each, from the datasheets. These parts have no boot blocks BTW.
With this, I think my patch is OK for inclusion. Regards, Leon. -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
