* Philipp Degler <[EMAIL PROTECTED]> [060322 17:58]: > Hi > > I started porting LinuxBIOS to IWill dk8-htx board. I used the dk8s2 to start > from. After some smaller changes to the Config.lb I could compile it and > flash it with flashrom. Unfortunately it seems that the default_resource_map > is not working.
> Is there any documentation or specification that can help me setting up this > resourcemap? Check the bios and kernel developers guide for K8. i would guess your SB (8111?) is not hanging off Node0 Link LDT0 Check for example the newisys/khepri resourcemap.c to see how it could look different. Also, dumping the resource map with the factory bios running will probably help. Stefan -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
