1. need to add acpi support in s2881 LinuxBIOS support to get it. Anyway 8111 acpi support is already there in Serengeti_leopard, so it will be easy to get that.
YH -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ward Vandewege Sent: Monday, April 10, 2006 3:43 PM To: [email protected] Subject: [LinuxBIOS] some more tyan/s2881 questions So the board is stable now. That's great. Some observations: 1. 'halt' no longer powers the machine off, which it does with the proprietary bios. 'halt -p' does the job though. LinuxBIOS oddity? 2. reboots seem to cause problems sometimes. I'm not sure yet what causes this, but I've had problems with the machine hanging after ACPI: Unable to locate RSDP It normally sits there for a few seconds, but I had the machine in such a state that it simply hung at that point. This may have had something to do with the IPMI card, which I'm experimenting with. I had to unplug the power before this problem went away, a cold restart didn't help. I will do more testing to see if I can pinpoint this. Thanks for all your help so far! Ward. -- Ward Vandewege <[EMAIL PROTECTED]> Free Software Foundation - Senior System Administrator -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
