Stefan Reinauer schrieb: > * Christian Sühs <[EMAIL PROTECTED]> [060421 15:27]: > >>>PCI: 00:13.0 init >>>Devices initialized >>>Copying IRQ routing tables to 0xf0000...done. >>>Verifing copy of IRQ routing tables at 0xf0000...failed >> >>What could be a reason for that? > > > CONFIG_COMPRESS is enabled. PIRQ tables are obsolete when you use ACPI, > so if possible, go ACPI. > Jup ;)
but now it works :D I don't know, what I have made wrong or what I have changed. It seems that false filo settings have made the trouble. However, the board starts with eaglelion/5bcm target. Ok, now I need the best way to get vga working. Any ideas? There is a Cyberpro 5000 on the board, normaly the vgabios is included in the factory bios. I think the chip is on the pci bus. Could I try the emulator to load the vgabios? chris -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
