To be clear I think the Config.lb should read:
chip northbridge/amd/gx1
device pci_domain 0 on
device pci 0.0 on end
chip drivers/pci/onboard
device pci 9.0 on end
register "rom_address" = "0xfffc0000"
end
end
chip southbridge/amd/cs5530
device pci 12.0 on
chip superio/NSC/pc97317
device pnp 2e.0 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
end
device pnp 2e.1 on # Mouse
irq 0x70 = 12
end
device pnp 2e.2 on # RTC
io 0x60 = 0x70
irq 0x70 = 8
end
device pnp 2e.3 off # FDC
end
device pnp 2e.4 on # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.5 on # COM2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.6 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.7 on # GPIO
io 0x60 = 0xe0
end
device pnp 2e.8 on # Power Management
io 0x60 = 0xe800
end
register "com1" = "{115200}"
register "com2" = "{38400}"
end
end
device pci 12.1 off end # SMI
device pci 12.2 on end # IDE
device pci 12.3 off end # Audio
device pci 12.4 off end # VGA
end
chip cpu/amd/model_gx1
end
end
end
Eric
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
