In our BIOS for the related platform, I don't see how we're disabling PCI. I
see that we set DC_FB_ST_OFFSET (GX_BASE + 0x8310) to 0 and also
DC_DUR_ST_OFFSET (GX_BASE + 0x8318).
Is the 00:12:4 a PCI address? Does that decode to Bus 0, Device 12 (decimal?),
Function 4?
-- Steve G.
Steve Goodrich ([EMAIL PROTECTED])
Advanced Micro Devices, Inc.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christian Sühs
Sent: Friday, April 28, 2006 11:16 AM
To: Ronald G Minnich
Cc: Stefan Reinauer; Goodrich,Steven; LinuxBIOS
Subject: Re: [LinuxBIOS] MB1030 / 3036 VGA comes up :D
>
> in acalc, you would do this:
> x40000000
> 30
> sr
>
Well, the graphic instructions for the geode are disabled in that case :D
because this value is writen to b8h (Graphic Control Registers)
However,
I'm not sure what I should do next.
I think i will play around with the BC_XMAP_1 registers and will set the amd
prefered values :D
Currently the whole video RAM section seems to be disabled.
a0000 - bffff
chris
>
> and get 1.
>
> ron
>
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
