Christian Sühs wrote: > >> >> wheras the "Kahlua Legacy" is very different.. >> >> 00:12.0 0601: 1078:0100 >> -00: 78 10 00 01 5f 01 80 02 00 00 01 06 04 40 80 00 >> +00: 78 10 00 01 1f 00 80 02 00 00 01 06 04 40 80 00 > > ^^^^^ > > PCI Command register (default 000Fh) > Factory bios adds here Memory write and Invalidate for the 5530 > LB enables additional Parity check and SERR as for the gx1. > Could be that this is done automatically, besides the settings before to > the gx1 > > rest are default values > >> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> -40: 89 10 ac 03 01 00 00 00 00 00 00 00 00 00 00 00 >> +40: 81 50 ce 45 01 00 00 00 00 00 00 00 00 00 00 00 > > ^^ ^^ ^^ ^^ > LB uses default for index 40 (89h) > Factory disables the PCI slave write buffer > > LB uses default for index 41 (10h) > Factory enables/adds F2 IDE Configuration trap (this is a SMI thing)
oh boy. I HOPE we don't need the SMI support just to run the IDE hardware! we didn't need this before on GX1. ron -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
