On Fri, May 05, 2006 at 04:57:17PM -0400, Ward Vandewege wrote: > On Thu, Apr 20, 2006 at 04:59:52PM -0700, Lu, Yinghai wrote: > > I have inited the hw sensors in LinuxBIOS for s2881. So you could use > > lmsensor to check the FAN speed. The config file is on Tyan web. > > > > For the Fan control, there should more some reg setting...to reduce the > > FAN speed winbond and adm1027...
> I can shut the machine down, do a cold boot into LinuxBIOS, and it still > works. > > Until I unplug the power to the machine, that is. > > After that, I can still read out everything (see attached > set_fan_speed_bad.txt) correctly, but now also _set_ the fan speed. I'm sorry this is confusing. After unplugging and replugging the power to the machine, I need to boot the proprietary BIOS once to be able to set the fan speed on any consecutive (cold) boot. Ward. -- Pong.be -( Writing software is more fun than working. )- Virtual hosting -( )- http://pong.be -( )- GnuPG public key: http://gpg.dtype.org -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
