Stefan Reinauer schrieb: > * Christian Sühs <[EMAIL PROTECTED]> [060511 15:54]: > >>It seems, I have to write my own entry16.inc code for the gx1. >>The default entry16.inc should enable the cache for example, but there >>are written false values to the cr0 register. > > > no. very very unlikely. Just write the correct values in auto.c is > enough. >
Ok, ok ;) now I have start with own folders for allwell/stb3036 under targets and mainboard. Is there a recommended way to use/call own functions/files under LB. Because, I have to had change settings for the cpu/amd/model_gx1 and others. You know, enabling the cache and so on. But I think i.e enabling memory segments for vga support and so on is a good think for everybody :D What about the emu support, is this rewritten to use any RAM? > >>Is it posible to remove the line from the Config.lb for the fpu? > > > Possibly possible, if the gx1 does all that.. But this will not take > more than a couple cycles, so the difference in size and time is not > measurable without quite some effort. > Yup ;) chris -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
