that is right. the post code is only useful before we get the output from serial port.
YH On 7/1/06, Stefan Reinauer <[EMAIL PROTECTED]> wrote: > > > * [EMAIL PROTECTED] <[EMAIL PROTECTED]> [060701 02:43]: > > From what ive read on the LB site, LB uses post codes quitre a bit, > > but i cant find a list of the codes ANYWARE :( > > Ive just tried LB on a VIA-EPAI-PD10000 board using the EPAI-M LB > > config (i dont have a serial cable connected at present, going to grab > > one tomorow!) > > Getting the system up without serial cable is really hard to impossible > I guess.. > > The post codes are not really used in LinuxBIOS as far as I can say. > > -- > coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br. > Tel.: +49 761 7668825 • Fax: +49 761 7664613 > Email: [EMAIL PROTECTED] • http://www.coresystems.de/ > > -- > linuxbios mailing list > [email protected] > http://www.openbios.org/mailman/listinfo/linuxbios -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
