Richard Smith wrote: >> I do not even get any comms from the serial port. Have checked the >> cable is >> ok, by >> booting normally. >> >> I only have 100Mhz memory installed, as it was going spare. Could >> this be a >> reason why >> it does not work ? > > Com port messages start happening pre-ram init. So No. You should at > least some version info build date, and get to the "Jumping to > LinuxBIOS..." string. > > Something must be different with the Com port on that board. > sorry didnt hit reply to all.
Ok thanks for the info, I guess I had better recheck the whole build process and make sure I am building what I think I am. Also I need to spend some time on seeing just exactly what linuxbios is doing and the order it does it in. Not really a good thing to just build code and expect it to work. I am not familiar with the BIOS boot process having mainly worked on much simpler embedded systems. The Com port is ok when booting normally from original bios. -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
