* Richard Smith <[EMAIL PROTECTED]> [061106 11:53]:
> Stefan Reinauer wrote:
> > * Li Haiqiang <[EMAIL PROTECTED]> [061106 05:45]:
> >> I write the 'ls -xxx' results to the PCI config registers.
> >> Can it work?
> >
> > As a first step this is worth a try, yes.
> >
> > But you need to find out which are relevant, and the order plays a big
> > role. Grab yourself a datasheet for the 440BX northbridge... Otherwise
> > it will break as soon as you put in another DIMM module.
>
> I think there is slightly more than zero chance this will work. The ram
> init routines in that code are for VIA. None of the ram commands are
> correct.
Ah, I understood he wants to omit the ram init code and just poke the
lspci -xxx values into the northbridge. This might work for a start,
right? At least thats how we started working on the k8 port
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: [EMAIL PROTECTED] • http://www.coresystems.de/
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
