LinuxBIOS-2.0.0.0Fallback Tue Nov  7 01:10:58 UTC 2006 starting...
Setting up default parameters for memory
Sizing memory
Probing for DIMM0
    Found DIMM0
    Page Size:       00002000
    Component Banks: 4
    Module Banks:    1
    DIMM size:       08000000
Probing for DIMM1
MC_BANK_CFG = 00701530
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0Fallback Tue Nov  7 01:10:58 UTC 2006 booting...
end 749799c2, start 0
32-bit delta 472
calibrate_tsc 32-bit result is 472
clocks_per_usec: 472
Enumerating buses...
scan_static_bus for Root Device
northbridge.c:enable_dev()
DEVICE_PATH_PCI_DOMAIN
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 00
northbridge.c:enable_dev()
device path type 2
PCI: 00:00.0 [1078/0001] ops
PCI: 00:00.0 [1078/0001] enabled
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: 00:0a.0 [10ec/8139] enabled
PCI: 00:0b.0 [10ec/8139] enabled
PCI: 00:0c.0 [10ec/8139] enabled
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
Disabling static device: PCI: 00:0f.0
PCI: devfn 0x79, bad id 0xffffffff
PCI: devfn 0x7a, bad id 0xffffffff
PCI: devfn 0x7b, bad id 0xffffffff
PCI: devfn 0x7c, bad id 0xffffffff
PCI: devfn 0x7d, bad id 0xffffffff
PCI: devfn 0x7e, bad id 0xffffffff
PCI: devfn 0x7f, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: 00:12.0 [1078/0100] bus ops
southbridge_enable: dev is 0001a5c0
PCI: 00:12.0 [1078/0100] enabled
malloc Enter, size 668, free_mem_ptr 00022000
malloc 0x00022000
PCI: 00:12.1 [1078/0101] enabled
malloc Enter, size 668, free_mem_ptr 0002229c
malloc 0x0002229c
PCI: 00:12.2 [1078/0102] ops
cs5530_ide: ide_enable
PCI: 00:12.2 [1078/0102] enabled
malloc Enter, size 668, free_mem_ptr 00022538
malloc 0x00022538
PCI: 00:12.3 [1078/0103] enabled
PCI: 00:12.4 [1078/0104] enabled
PCI: devfn 0x95, bad id 0xffffffff
PCI: devfn 0x96, bad id 0xffffffff
PCI: devfn 0x97, bad id 0xffffffff
PCI: 00:13.0 [0e11/a0f8] enabled
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
scan_static_bus for PCI: 00:12.0
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 enabled
PNP: 002e.3 enabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 enabled
PNP: 002e.8 enabled
PNP: 002e.9 enabled
PNP: 002e.a enabled
PCI: 00:12.1 enabled
PCI: 00:12.2 enabled
PCI: 00:12.3 enabled
scan_static_bus for PCI: 00:12.0 done
PCI: pci_scan_bus returning with max=000
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
northbridge.c:pci_domain_read_resources()
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:0a.0 10 *  [0x00000400 - 0x000004ff] io
PCI: 00:0b.0 10 *  [0x00000800 - 0x000008ff] io
PCI: 00:0c.0 10 *  [0x00000c00 - 0x00000cff] io
PCI: 00:12.2 20 *  [0x00001000 - 0x0000107f] io
Root Device compute_allocate_io: base: 00001080 size: 00000c80 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.4 10 *  [0x00000000 - 0x00000fff] mem
PCI: 00:13.0 10 *  [0x00001000 - 0x00001fff] mem
PCI: 00:0a.0 14 *  [0x00002000 - 0x000020ff] mem
PCI: 00:0b.0 14 *  [0x00003000 - 0x000030ff] mem
PCI: 00:0c.0 14 *  [0x00004000 - 0x000040ff] mem
PCI: 00:12.1 10 *  [0x00005000 - 0x000050ff] mem
PCI: 00:12.3 10 *  [0x00006000 - 0x0000607f] mem
Root Device compute_allocate_mem: base: 00006080 size: 00006080 align: 12 gran: 0 done
Done reading resources.
Allocating VGA resource PCI: 00:12.4
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000c80 align: 8 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:0a.0 10 *  [0x00001000 - 0x000010ff] io
PCI: 00:0b.0 10 *  [0x00001400 - 0x000014ff] io
PCI: 00:0c.0 10 *  [0x00001800 - 0x000018ff] io
PCI: 00:12.2 20 *  [0x00001c00 - 0x00001c7f] io
Root Device compute_allocate_io: base: 00001c80 size: 00000c80 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: febf9000 size: 00006080 align: 12 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:12.4 10 *  [0xfebf9000 - 0xfebf9fff] mem
PCI: 00:13.0 10 *  [0xfebfa000 - 0xfebfafff] mem
PCI: 00:0a.0 14 *  [0xfebfb000 - 0xfebfb0ff] mem
PCI: 00:0b.0 14 *  [0xfebfc000 - 0xfebfc0ff] mem
PCI: 00:0c.0 14 *  [0xfebfd000 - 0xfebfd0ff] mem
PCI: 00:12.1 10 *  [0xfebfe000 - 0xfebfe0ff] mem
PCI: 00:12.3 10 *  [0xfebff000 - 0xfebff07f] mem
Root Device compute_allocate_mem: base: febff080 size: 00006080 align: 12 gran: 0 done
Root Device assign_resources, bus 0 link: 0
BC_DRAM_TOP = 0x07bfffff
MC_GBASE_ADD = 0x000000f8
I would set ram size to 124 Mbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:0a.0 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:0a.0 14 <- [0x00febfb000 - 0x00febfb0ff] mem
PCI: 00:0b.0 10 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:0b.0 14 <- [0x00febfc000 - 0x00febfc0ff] mem
PCI: 00:0c.0 10 <- [0x0000001800 - 0x00000018ff] io
PCI: 00:0c.0 14 <- [0x00febfd000 - 0x00febfd0ff] mem
PCI: 00:12.1 10 <- [0x00febfe000 - 0x00febfe0ff] mem
PCI: 00:12.2 20 <- [0x0000001c00 - 0x0000001c7f] io
PCI: 00:12.3 10 <- [0x00febff000 - 0x00febff07f] mem
PCI: 00:12.4 10 <- [0x00febf9000 - 0x00febf9fff] mem
PCI: 00:12.4 30 <- [0x00fffc0000 - 0x00fffbffff] romem
PCI: 00:13.0 10 <- [0x00febfa000 - 0x00febfafff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 147
PCI: 00:0a.0 subsystem <- 00/00
PCI: 00:0a.0 cmd <- 143
PCI: 00:0b.0 subsystem <- 00/00
PCI: 00:0b.0 cmd <- 143
PCI: 00:0c.0 subsystem <- 00/00
PCI: 00:0c.0 cmd <- 143
cs5530.c: cs5530_pci_dev_enable_resources()
PCI: 00:12.0 cmd <- 14f
PNP: 002e.8 missing enable_resources
PNP: 002e.9 missing enable_resources
PCI: 00:12.1 missing enable_resources
PCI: 00:12.2 missing enable_resources
PCI: 00:12.3 missing enable_resources
PCI: 00:12.1 cmd <- 142
PCI: 00:12.2 cmd <- 141
PCI: 00:12.3 cmd <- 142
PCI: 00:12.4 subsystem <- 00/00
PCI: 00:12.4 cmd <- 143
PCI: 00:13.0 subsystem <- 00/00
PCI: 00:13.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
northbridge: northbridge_init()
Calling enable_cache()
PCI: 00:12.0 init
cs5530: southbridge_init
PNP: 002e.1 init
PNP: 002e.2 init
PNP: 002e.3 init
PNP: 002e.5 init
PNP: 002e.7 init
PNP: 002e.a init
PCI: 00:12.4 init
rom address for PCI: 00:12.4 = fffc0000
PCI Expansion ROM, signature 0xaa55, INIT size 0x8000, data ptr 0x68b9
PCI ROM Image, Vendor 1078, Device 0104,
PCI ROM Image,  Class Code 030000, Code Type 00
copying VGA ROM Image from 0xfffc0000 to 0xc0000, 0x8000 bytes
entering emulator
int15 vector at 10fe65
int10 vector at c009f
int6d vector at c00dc
halt_sys: file /opt/linuxbios-SVN/src/devices/emulator/x86emu/ops.c, line 4387
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:13.0 init
PCI: 00:12.1 init
PCI: 00:12.2 init
cs5530_ide: ide_init
PCI: 00:12.3 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
done.
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000b50  checksum 7fe6

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

rom_stream: 0xfffe8000 - 0xfffeffff
Uncompressing to RAM 0x01000000  olen = 0x000068c8 done.
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
malloc Enter, size 32, free_mem_ptr 000227d4
malloc 0x000227d4
New segment addr 0x100000 size 0x20560 offset 0xc0 filesize 0x65c8
(cleaned up) New segment addr 0x100000 size 0x20560 offset 0xc0 filesize 0x65c8
lb: [0x0000000000004000, 0x0000000000026000)
malloc Enter, size 32, free_mem_ptr 000227f4
malloc 0x000227f4
New segment addr 0x120560 size 0x48 offset 0x66a0 filesize 0x48
(cleaned up) New segment addr 0x120560 size 0x48 offset 0x66a0 filesize 0x48
lb: [0x0000000000004000, 0x0000000000026000)
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000020560 filesz: 0x00000000000065c8
[ 0x0000000000100000, 00000000001065c8, 0x0000000000120560) <- 00000000000000c0
Clearing Segment: addr: 0x00000000001065c8 memsz: 0x0000000000019f98
Loading Segment: addr: 0x0000000000120560 memsz: 0x0000000000000048 filesz: 0x0000000000000048
[ 0x0000000000120560, 00000000001205a8, 0x00000000001205a8) <- 00000000000066a0
Loaded segments
verified segments
closed down stream
Jumping to boot code at 0x1049dc
entry    = 0x001049dc
lb_start = 0x00004000
lb_size  = 0x00022000
adjust   = 0x07bda000
buffer   = 0x07bbc000
     elf_boot_notes = 0x0001b2e0
adjusted_boot_notes = 0x07bf52e0
FILO version 0.5 (lfcorreia@devel) Wed Nov  1 23:58:04 UTC 2006
Press <Enter> for default boot, or <Esc> for boot prompt...
boot: hda1:/vmlinuz root=/dev/hda2 append initrd=/initrd-2.4.20-8.img console=ttyS0,115200
