On Sat, Dec 02, 2006 at 03:10:02PM -0500, Corey Osgood wrote: > I'm thinking something like this: connect two plcc sockets > together, back to back, sodiering together all the connectors > except chip enable and/or power.
Sure, it will work just fine. I would suggest wiring between the two PLCC sockets however, since they're keyed and don't handle mirroring without help. Or - make a board for two SMT PLCC sockets. > then, de-sodier those connectors from the existing chip. run wires > to the motherboard on those lines, and also to a switch, and then > also to the pair of plcc sockets. I would probably let the switch control one of two AND gates per switched signal, the other input being the signal from mobo and output going to one socket each. //Peter -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
