To use the debug device I need to work through a port so I need
to call ioreamp or similar. Since we are doing this very early
I chose to use a fixmap (because we are unlikely to free the mapping)
and because it is simple. If we preallocate the fixmap pud and pmd
entries the existing fixmap codes works anytime from power up without
modifications or memory allocations. So we don't need a special case.
---
arch/x86_64/kernel/head.S | 11 ++++++++++-
1 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 2f65469..4004965 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -271,7 +271,16 @@ NEXT_PAGE(level3_kernel_pgt)
.fill 510,8,0
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
.quad phys_level2_kernel_pgt | 0x007
- .fill 1,8,0
+ .quad phys_level2_fixmap_pgt | 0x007
+
+NEXT_PAGE(level2_fixmap_pgt)
+ .fill 506,8,0
+ .quad phys_level1_fixmap_pgt | 0x007
+ /* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
+ .fill 5,8,0
+
+NEXT_PAGE(level1_fixmap_pgt)
+ .fill 512,8,0
NEXT_PAGE(level2_ident_pgt)
/* 40MB for bootup. */
--
1.4.2.rc3.g7e18e-dirty
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
