Stefan Reinauer wrote:
> * Ben Hewson <[EMAIL PROTECTED]> [070113 19:38]:
>
>> Stefan Reinauer wrote:
>> Yes rom_cc is fine, but I have a problem where changes to the code base
>> seem to have caused ide problems with Filo(it cant see the ide drive).
>>
>
> - what IDE drive?
> - what FILO? (svn rev?)
> - Did you change the filo config?
> - Do you have a log file?
>
>
there are some posts on the mailing list I made, but basically my older
version of linuxbios using filo boots, but a later version after the
rom_cc patch doesn't boot any more.
exactly the same hardware and filo image (v 0.5 ).
I get the following error from filo using the later version.
Detected floating bus
No drive detected on IDE channel 0
The older version I have works just fine though.
Have attached the log files from both working and non working versions.
If you compare the two you will see that the pci enumeration/allocation
of resources if different, although it only appears to be so with
respect to the ide controller.
I have been comparing both sets of files to find any differences. The
biggest change I can see is the change to the
pci read/write functions, where the 'where' parameter changed from 8 to
16 bits but I dont think that is the problem.
Ben
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0Normal Mon Dec 4 20:57:05 GMT 2006 booting...
Enumerating buses...
scan_static_bus for Root Device
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [1106/0601] ops
PCI: 00:00.0 [1106/0601] enabled
malloc Enter, size 668, free_mem_ptr 00018000
malloc 0x00018000
Capability: 0x07 @ 0x80
Capability: 0x08 @ 0x80
Capability: 0x10 @ 0x80
PCI: 00:01.0 [1106/8601] enabled
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: 00:11.0 [1106/8231] bus ops
PCI: 00:11.0 [1106/8231] enabled
PCI: 00:11.1 [1106/0571] ops
PCI: 00:11.1 [1106/0571] enabled
PCI: 00:11.2 [1106/3038] disabled
PCI: 00:11.3 [1106/3038] disabled
PCI: 00:11.4 [1106/8235] ops
PCI: 00:11.4 [1106/8235] disabled
PCI: 00:11.5 [1106/3058] disabled
PCI: 00:11.6 [1106/3068] enabled
PCI: devfn 0x8f, bad id 0xffffffff
PCI: 00:12.0 [1106/3065] ops
PCI: 00:12.0 [1106/3065] enabled
PCI: devfn 0x98, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 0001829c
malloc 0x0001829c
PCI: 00:14.0 [1814/0301] enabled
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
do_pci_scan_bridge for PCI: 00:01.0
PCI: pci_scan_bus for bus 01
PCI: devfn 0x0, bad id 0xffffffff
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: devfn 0x90, bad id 0xffffffff
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
PCI: pci_scan_bus returning with max=001
do_pci_scan_bridge returns max 1
scan_static_bus for PCI: 00:11.0
PNP: 002e.0 enabled
PNP: 002e.1 disabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
PNP: 002e.b enabled
scan_static_bus for PCI: 00:11.0 done
PCI: pci_scan_bus returning with max=001
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI: 00:00.0 register 10(00000008), read-only ignoring it
PCI: 00:01.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran:
12
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran:
12 done
PCI: 00:01.0 compute_allocate_io: base: 0000f000 size: 00000000 align: 12 gran:
12
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_io: base: 0000f000 size: 00000000 align: 12 gran:
12 done
PCI: 00:01.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:01.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:01.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 compute_allocate_mem: base: fff00000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_mem: base: fff00000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.6 10 * [0x00000400 - 0x000004ff] io
PCI: 00:12.0 10 * [0x00000800 - 0x000008ff] io
PCI: 00:11.1 20 * [0x00000c00 - 0x00000c0f] io
PCI: 00:11.1 10 * [0x00000c10 - 0x00000c17] io
PCI: 00:11.1 18 * [0x00000c20 - 0x00000c27] io
PCI: 00:11.1 14 * [0x00000c30 - 0x00000c33] io
PCI: 00:11.1 1c * [0x00000c40 - 0x00000c43] io
Root Device compute_allocate_io: base: 00000c44 size: 00000844 align: 8 gran: 0
done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:14.0 10 * [0x00000000 - 0x00007fff] mem
PCI: 00:12.0 14 * [0x00008000 - 0x000080ff] mem
Root Device compute_allocate_mem: base: 00008100 size: 00008100 align: 15 gran:
0 done
Done reading resources.
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000844 align: 8 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.6 10 * [0x00001000 - 0x000010ff] io
PCI: 00:12.0 10 * [0x00001400 - 0x000014ff] io
PCI: 00:11.1 20 * [0x00001800 - 0x0000180f] io
PCI: 00:11.1 10 * [0x00001810 - 0x00001817] io
PCI: 00:11.1 18 * [0x00001820 - 0x00001827] io
PCI: 00:11.1 14 * [0x00001830 - 0x00001833] io
PCI: 00:11.1 1c * [0x00001840 - 0x00001843] io
Root Device compute_allocate_io: base: 00001844 size: 00000844 align: 8 gran: 0
done
Root Device compute_allocate_mem: base: febf0000 size: 00008100 align: 15 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:14.0 10 * [0xfebf0000 - 0xfebf7fff] mem
PCI: 00:12.0 14 * [0xfebf8000 - 0xfebf80ff] mem
Root Device compute_allocate_mem: base: febf8100 size: 00008100 align: 15 gran:
0 done
Root Device assign_resources, bus 0 link: 0
I would set ram size to 0x40000 Kbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:11.1 10 <- [0x0000001810 - 0x0000001817] io
PCI: 00:11.1 14 <- [0x0000001830 - 0x0000001833] io
PCI: 00:11.1 18 <- [0x0000001820 - 0x0000001827] io
PCI: 00:11.1 1c <- [0x0000001840 - 0x0000001843] io
PCI: 00:11.1 20 <- [0x0000001800 - 0x000000180f] io
PCI: 00:11.6 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:12.0 10 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:12.0 14 <- [0x00febf8000 - 0x00febf80ff] mem
PCI: 00:14.0 10 <- [0x00febf0000 - 0x00febf7fff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 bridge ctrl <- 0003
PCI: 00:01.0 cmd <- 147
PCI: 00:11.0 cmd <- 1c7
PCI: 00:11.1 cmd <- 1c1
PCI: 00:11.6 subsystem <- 00/00
PCI: 00:11.6 cmd <- 141
PCI: 00:12.0 cmd <- 1c3
PCI: 00:14.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
VT8601 random fixup ...
PCI: 00:11.0 init
vt8231 init
IDE enable in reg. 50 is 0x7
set IDE reg. 50 to 0x7
IRQs in reg. 4c are 0x4
setting reg. 4c to 0x4
RTC Init
Invalid CMOS LB checksum
pci_routing_fixup: dev is 0000f840
setting southbridge
Assigning IRQ 12 to 0:11.2
Readback = 12
pci_level_irq: current ints are 0x0
pci_level_irq: try to set ints 0x1000
Assigning IRQ 12 to 0:11.3
Readback = 12
pci_level_irq: current ints are 0x1000
pci_level_irq: try to set ints 0x1000
Assigning IRQ 10 to 0:11.5
Readback = 10
pci_level_irq: current ints are 0x1000
pci_level_irq: try to set ints 0x1400
Assigning IRQ 10 to 0:11.6
Readback = 10
pci_level_irq: current ints are 0x1400
pci_level_irq: try to set ints 0x1400
setting ethernet
Assigning IRQ 11 to 0:12.0
Readback = 11
pci_level_irq: current ints are 0x1400
pci_level_irq: try to set ints 0x1c00
setting pci slot
Assigning IRQ 5 to 0:14.0
Readback = 5
pci_level_irq: current ints are 0x1c00
pci_level_irq: try to set ints 0x1c20
pci_routing_fixup: DONE
PNP: 002e.0 init
PNP: 002e.2 init
PNP: 002e.5 init
PNP: 002e.b init
PCI: 00:11.1 init
ide_init: enabling compatibility IDE addresses
enables in reg 0x42 0xc9
enables in reg 0x42 read back as 0x9
enables in reg 0x40 0x8
enables in reg 0x40 read back as 0xb
enables in reg 0x9 0x8f
enables in reg 0x9 read back as 0x8a
command in reg 0x4 0x81
command in reg 0x4 reads back as 0x7
PCI: 00:11.6 init
PCI: 00:12.0 init
Configuring VIA LAN
APIC_CLUSTER: 0 init
malloc Enter, size 668, free_mem_ptr 00018538
malloc 0x00018538
Initializing CPU #0
CPU: vendor Centaur device 673
CPU: family 06, model 07, stepping 03
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting variable MTRR 0, base: 0MB, range: 256MB, type WB
ADDRESS_MASK_HIGH=0xf
DONE variable MTRRs
Clear out the extra MTRR's
call enable_var_mtrr()
Leave x86_setup_var_mtrrs
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Disabling local apic...done.
CPU #0 Initialized
PCI: 00:14.0 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
done.
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000b4c checksum 6adf
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffcffff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
malloc Enter, size 32, free_mem_ptr 000187d4
malloc 0x000187d4
New segment addr 0x100000 size 0x20100 offset 0xe0 filesize 0x6168
(cleaned up) New segment addr 0x100000 size 0x20100 offset 0xe0 filesize 0x6168
lb: [0x0000000000004000, 0x000000000001c000)
malloc Enter, size 32, free_mem_ptr 000187f4
malloc 0x000187f4
New segment addr 0x120100 size 0x48 offset 0x6260 filesize 0x48
(cleaned up) New segment addr 0x120100 size 0x48 offset 0x6260 filesize 0x48
lb: [0x0000000000004000, 0x000000000001c000)
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000020100 filesz:
0x0000000000006168
[ 0x0000000000100000, 0000000000106168, 0x0000000000120100) <- 00000000000000e0
Clearing Segment: addr: 0x0000000000106168 memsz: 0x0000000000019f98
Loading Segment: addr: 0x0000000000120100 memsz: 0x0000000000000048 filesz:
0x0000000000000048
[ 0x0000000000120100, 0000000000120148, 0x0000000000120148) <- 0000000000006260
Loaded segments
verified segments
closed down stream
Jumping to boot code at 0x1041d8
entry = 0x001041d8
lb_start = 0x00004000
lb_size = 0x00018000
adjust = 0x0ffe4000
buffer = 0x0ffd0000
elf_boot_notes = 0x00013000
adjusted_boot_notes = 0x0fff7000
FILO version 0.5 ([EMAIL PROTECTED]) Sun Nov 12 17:35:53 GMT 2006
boot: hda1:/kern root=/dev/hda3 console=ttyS0,115200
Detected floating bus
No drive detected on IDE channel 0
boot: hda1:/kern root=/dev/hda3 console=ttyS0,115200
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0Normal Fri Nov 10 18:45:42 GMT 2006 booting...
Enumerating buses...
scan_static_bus for Root Device
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1106/0601] ops
PCI: 00:00.0 [1106/0601] enabled
malloc Enter, size 668, free_mem_ptr 00018000
malloc 0x00018000
Capability: 0x07 @ 0x80
Capability: 0x08 @ 0x80
Capability: 0x10 @ 0x80
PCI: 00:01.0 [1106/8601] enabled
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: 00:11.0 [1106/8231] bus ops
PCI: 00:11.0 [1106/8231] enabled
PCI: 00:11.1 [1106/0571] ops
PCI: 00:11.1 [1106/0571] enabled
PCI: 00:11.2 [1106/3038] disabled
PCI: 00:11.3 [1106/3038] disabled
PCI: 00:11.4 [1106/8235] ops
PCI: 00:11.4 [1106/8235] disabled
PCI: 00:11.5 [1106/3058] disabled
PCI: 00:11.6 [1106/3068] enabled
PCI: devfn 0x8f, bad id 0xffffffff
PCI: 00:12.0 [1106/3065] ops
PCI: 00:12.0 [1106/3065] enabled
PCI: devfn 0x98, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 0001829c
malloc 0x0001829c
PCI: 00:14.0 [1814/0301] enabled
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
do_pci_scan_bridge for PCI: 00:01.0
PCI: pci_scan_bus for bus 1
PCI: devfn 0x0, bad id 0xffffffff
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: devfn 0x90, bad id 0xffffffff
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
PCI: pci_scan_bus returning with max=01
do_pci_scan_bridge returns max 1
scan_static_bus for PCI: 00:11.0
PNP: 002e.0 enabled
PNP: 002e.1 disabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
PNP: 002e.b enabled
scan_static_bus for PCI: 00:11.0 done
PCI: pci_scan_bus returning with max=01
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI: 00:00.0 register 10(00000008), read-only ignoring it
PCI: 00:01.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran:
12
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran:
12 done
PCI: 00:01.0 compute_allocate_io: base: 0000f000 size: 00000000 align: 12 gran:
12
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_io: base: 0000f000 size: 00000000 align: 12 gran:
12 done
PCI: 00:01.0 1c <- [0x000000f000 - 0x000000efff] bus 1 io
PCI: 00:01.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_prefmem: base: fff00000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 1 prefmem
PCI: 00:01.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 compute_allocate_mem: base: fff00000 size: 00000000 align: 20
gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:01.0 compute_allocate_mem: base: fff00000 size: 00000000 align: 20
gran: 20 done
PCI: 00:01.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 1 mem
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.6 10 * [0x00000400 - 0x000004ff] io
PCI: 00:12.0 10 * [0x00000800 - 0x000008ff] io
PCI: 00:11.1 20 * [0x00000c00 - 0x00000c0f] io
Root Device compute_allocate_io: base: 00000c10 size: 00000810 align: 8 gran: 0
done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:14.0 10 * [0x00000000 - 0x00007fff] mem
PCI: 00:12.0 14 * [0x00008000 - 0x000080ff] mem
Root Device compute_allocate_mem: base: 00008100 size: 00008100 align: 15 gran:
0 done
Done reading resources.
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00000810 align: 8 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:11.6 10 * [0x00001000 - 0x000010ff] io
PCI: 00:12.0 10 * [0x00001400 - 0x000014ff] io
PCI: 00:11.1 20 * [0x00001800 - 0x0000180f] io
Root Device compute_allocate_io: base: 00001810 size: 00000810 align: 8 gran: 0
done
Root Device compute_allocate_mem: base: febf0000 size: 00008100 align: 15 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:14.0 10 * [0xfebf0000 - 0xfebf7fff] mem
PCI: 00:12.0 14 * [0xfebf8000 - 0xfebf80ff] mem
Root Device compute_allocate_mem: base: febf8100 size: 00008100 align: 15 gran:
0 done
Root Device assign_resources, bus 0 link: 0
I would set ram size to 0x40000 Kbytes
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:11.1 20 <- [0x0000001800 - 0x000000180f] io
PCI: 00:11.6 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:12.0 10 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:12.0 14 <- [0x00febf8000 - 0x00febf80ff] mem
PCI: 00:14.0 10 <- [0x00febf0000 - 0x00febf7fff] mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 bridge ctrl <- 0003
PCI: 00:01.0 cmd <- 147
PCI: 00:11.0 cmd <- 1c7
PCI: 00:11.1 cmd <- 1c1
PCI: 00:11.6 subsystem <- 00/00
PCI: 00:11.6 cmd <- 141
PCI: 00:12.0 cmd <- 1c3
PCI: 00:14.0 cmd <- 142
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
VT8601 random fixup ...
PCI: 00:11.0 init
vt8231 init
IDE enable in reg. 50 is 0x7
set IDE reg. 50 to 0x7
IRQs in reg. 4c are 0x4
setting reg. 4c to 0x4
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
pci_routing_fixup: dev is 0000f720
setting southbridge
Assigning IRQ 12 to 0:11.2
Readback = 12
pci_level_irq: current ints are 0x0
pci_level_irq: try to set ints 0x1000
pci_level_irq: lower order bits are wrong: want 0x0, got 0x10
Assigning IRQ 12 to 0:11.3
Readback = 12
pci_level_irq: current ints are 0x1000
pci_level_irq: try to set ints 0x1000
pci_level_irq: lower order bits are wrong: want 0x0, got 0x10
Assigning IRQ 10 to 0:11.5
Readback = 10
pci_level_irq: current ints are 0x1000
pci_level_irq: try to set ints 0x1400
pci_level_irq: lower order bits are wrong: want 0x4, got 0x14
Assigning IRQ 10 to 0:11.6
Readback = 10
pci_level_irq: current ints are 0x1400
pci_level_irq: try to set ints 0x1400
pci_level_irq: lower order bits are wrong: want 0x4, got 0x14
setting ethernet
Assigning IRQ 11 to 0:12.0
Readback = 11
pci_level_irq: current ints are 0x1400
pci_level_irq: try to set ints 0x1c00
pci_level_irq: lower order bits are wrong: want 0xc, got 0x1c
setting pci slot
Assigning IRQ 5 to 0:14.0
Readback = 5
pci_level_irq: current ints are 0x1c00
pci_level_irq: try to set ints 0x1c20
pci_level_irq: lower order bits are wrong: want 0x0, got 0x20
pci_level_irq: lower order bits are wrong: want 0xc, got 0x1c
pci_routing_fixup: DONE
PNP: 002e.0 init
PNP: 002e.2 init
PNP: 002e.5 init
PNP: 002e.b init
PCI: 00:11.1 init
ide_init: enabling compatibility IDE addresses
enables in reg 0x42 0x0
enables in reg 0x42 read back as 0x0
enables in reg 0x40 0x8
enables in reg 0x40 read back as 0xb
enables in reg 0x9 0x8f
enables in reg 0x9 read back as 0x8a
command in reg 0x4 0x81
command in reg 0x4 reads back as 0x7
PCI: 00:11.6 init
PCI: 00:12.0 init
Configuring VIA LAN
APIC_CLUSTER: 0 init
malloc Enter, size 668, free_mem_ptr 00018538
malloc 0x00018538
Initializing CPU #0
CPU: vendor Centaur device 673
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting variable MTRR 0, base: 0MB, range: 256MB, type WB
ADDRESS_MASK_HIGH=0xf
DONE variable MTRRs
Clear out the extra MTRR's
ADDRESS_MASK_HIGH=0xf
ADDRESS_MASK_HIGH=0xf
ADDRESS_MASK_HIGH=0xf
ADDRESS_MASK_HIGH=0xf
ADDRESS_MASK_HIGH=0xf
ADDRESS_MASK_HIGH=0xf
ADDRESS_MASK_HIGH=0xf
call enable_var_mtrr()
Leave x86_setup_var_mtrrs
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Disabling local apic...done.
CPU #0 Initialized
PCI: 00:14.0 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
done.
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000b4c checksum ced0
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffcffff
Found ELF candiate at offset 0
header_offset is 0
Try to load at offset 0x0
malloc Enter, size 32, free_mem_ptr 000187d4
malloc 0x000187d4
New segment addr 0x100000 size 0x20100 offset 0xe0 filesize 0x6168
(cleaned up) New segment addr 0x100000 size 0x20100 offset 0xe0 filesize 0x6168
lb: [0x0000000000004000, 0x000000000001c000)
malloc Enter, size 32, free_mem_ptr 000187f4
malloc 0x000187f4
New segment addr 0x120100 size 0x48 offset 0x6260 filesize 0x48
(cleaned up) New segment addr 0x120100 size 0x48 offset 0x6260 filesize 0x48
lb: [0x0000000000004000, 0x000000000001c000)
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000020100 filesz:
0x0000000000006168
[ 0x0000000000100000, 0000000000106168, 0x0000000000120100) <- 00000000000000e0
Clearing Segment: addr: 0x0000000000106168 memsz: 0x0000000000019f98
Loading Segment: addr: 0x0000000000120100 memsz: 0x0000000000000048 filesz:
0x0000000000000048
[ 0x0000000000120100, 0000000000120148, 0x0000000000120148) <- 0000000000006260
Loaded segments
verified segments
closed down stream
Jumping to boot code at 0x1041d8
entry = 0x001041d8
lb_start = 0x00004000
lb_size = 0x00018000
adjust = 0x0ffe4000
buffer = 0x0ffd0000
elf_boot_notes = 0x00012ee0
adjusted_boot_notes = 0x0fff6ee0
FILO version 0.5 ([EMAIL PROTECTED]) Thu Oct 5 20:44:46 BST 2006
boot: hda1:/kern root=/dev/hda3 console=ttyS0,115200
hda: LBA48 80GB: ST380011A
Mounted ext2fs
Found Linux version 2.6.15.1 ([EMAIL PROTECTED]) #8 PREEMPT Fri Jun 30 20:04:19
BST 2006 bzImage.
Loading kernel...
--
linuxbios mailing list
[email protected]
http://www.openbios.org/mailman/listinfo/linuxbios
