Is the VGA device treated as add on card or onboard device in your HW model?
In first case, the VGA BIOS is supposed to be loaded by HW model. Such as qemu-i386, or xen start ... YH ________________________________ From: Joe Pub [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 28, 2007 10:52 AM To: Lu, Yinghai Cc: [email protected] Subject: Re: [LinuxBIOS] LinuxBIOS and VMWare Hi Lu, I have changed the config as suggested, didn't realise that the PCI id's had to be in numerical order. Different result with VMWare now, it reports a triple fault within the VMWare log, but that it as much as I can get from it, still no serial output when VGA is on Regards, Joe On 28/02/07, Lu, Yinghai <[EMAIL PROTECTED]> wrote: chip northbridge/intel/i440bx device pci_domain 0 on device pci 0.0 on end # host bridge device pci 1.0 on end # PCI bridge device pci 10.0 on end # SCSI storage controller device pci 11.0 on end # Ethernet controller device pci 12.0 on end # Audio controller device pci f.0 on # VGA controller chip drivers/pci/onboard device pci f.0 on end register "rom_address" = "0xfff80000" end end device pci 7.0 on # ISA bridge end end = ==> chip northbridge/intel/i440bx device pci_domain 0 on device pci 0.0 on end # host bridge device pci 1.0 on end # PCI bridge device pci 7.0 on # ISA bridge end chip drivers/pci/onboard device pci f.0 on end register "rom_address" = "0xfff80000" end device pci 10.0 on end # SCSI storage controller device pci 11.0 on end # Ethernet controller device pci 12.0 on end # Audio controller end
-- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
