Greetings, I had the same issue with FC3, but it resolved when I reduced the size of the code a bit. For some reason, Fedora's objcopy apparently misses the real error and then has another problem.
G'day, sjames ||||| |||| ||||||||||||| ||| by Linux Labs International, Inc. Steven James, CTO 55 Marietta Street Suite 1830 Atlanta, Ga 30303 866 824 9737 support On Thu, 8 Mar 2007 [EMAIL PROTECTED] wrote: > Quoting Corey Osgood <[EMAIL PROTECTED]>: > > > [EMAIL PROTECTED] wrote: > >> No, I think I am going to just try Gentoo though. It's time for a > >> change, I have been using Fedora/Redhat for many years. And I have > >> heard great things about Gentoo. > >> > >> Thanks - Joe > > Well, just for the record, I've intalled FC6 x86 in QEMU from the DVD > > iso, and tried both with and without SELinux enabled, and I had > > absolutely no build errors on several targets (via epia, asus p2b, and > > a couple tyan boards). I didn't even have to turn off stack protectors, > > and this is a fully updated system. I'm not sure where your error was > > coming from or even what it was, sorry. Enjoy Gentoo, cya again in a > > week or so when you're done compiling the base system ;) > > > > -Corey > > Hmm very strange. Both Ron and I tried it on FC5 and FC6 with no luck?? > This was the error: > > --------------------------------------- > cp linuxbios_ram.nrv2b linuxbios_ram.rom > echo '/*ldoptions*/' > ldscript.ld; cat ldoptions >> ldscript.ld ; for > file in /root/LinuxBIOSv2-2564/src/arch/i386/init/ldscript.lb > /root/LinuxBIOSv2-2564/src//cpu/x86/16bit/entry16.lds > /root/LinuxBIOSv2-2564/src//cpu/x86/32bit/entry32.lds > /root/LinuxBIOSv2-2564/src//cpu/x86/32bit/reset32.lds > /root/LinuxBIOSv2-2564/src//arch/i386/lib/id.lds ; do echo /\* $file > \*/ >> ldscript.ld; cat $file >> ldscript.ld ; done > gcc -m32 -nostdlib -nostartfiles -static -o linuxbios -T ldscript.ld crt0.o > nm -n linuxbios | sort > linuxbios.map > objcopy --gap-fill 0xff -O binary linuxbios linuxbios.strip > objcopy: linuxbios.strip: Bad value > objcopy: linuxbios.strip: Bad value > make[1]: *** [linuxbios.strip] Error 1 > make[1]: Leaving directory > `/root/LinuxBIOSv2-2564/targets/rca/rm4100/rm4100/normal' > make: *** [normal/linuxbios.rom] Error 1 > ----------------------------------------- > > Maybe I will try a fresh install of FC6??? > > Thanks - Joe > > -- > linuxbios mailing list > [email protected] > http://www.openbios.org/mailman/listinfo/linuxbios > -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
