> * [EMAIL PROTECTED] <[EMAIL PROTECTED]> [070321 11:07]: >> For initialise the serial port for debugging, what is the command and or >> to place it ? > > The serial init function is usually called from the mainboard's auto.c. > The chip specific code is in the superio/ directory. > >> If I have just create the file linuxbios.rom with etherboot for payload, >> and if I test to flash my rom, normaly even if all doesn't function, at >> least will have something on the screen or not ? if not I depend on my >> VGA ? > > No, if things don't work you will not see something on your screen. VGA > setup is so complex that it basically almost the last thing that happens > in LinuxBIOS. > So when you see something on the screen, the whole setup basically > worked fine. > > All LinuxBIOS ports have serial console though. > Or USB debug console for those boards with no SuperIO/serial port. > > Stefan > > -- > coresystems GmbH ⢠Brahmsstr. 16 ⢠D-79104 Freiburg i. Br. > Tel.: +49 761 7668825 ⢠Fax: +49 761 7664613 > Email: [EMAIL PROTECTED] ⢠http://www.coresystems.de/ > > -- > linuxbios mailing list > [email protected] > http://www.linuxbios.org/mailman/listinfo/linuxbios
Thanks for your explanation ;) ++ -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
