> * [EMAIL PROTECTED] <[EMAIL PROTECTED]> [070322 11:20]: >> Hi all, >> >> I have successfully flash LinuxBIOS on my chip SST39SF020A with >> flashrom, >> when I reboot my card, I have no visual response, after that I use an >> Null >> modem db9 wire between my card with LinuxBios et my computer. I have use >> Hyperterminal with parameter 115200 baud, 8bit, no parity, 1 bit stop, >> and >> after reboot my card, I have nothing ... >> >> I don't know why, in my config file I have set normally the good line >> for >> active the com port in debug mode, but if somebody know all of the >> modification for check if it's ok, it's welcome ;). >> >> thanks by advance for your help. >> >> regards >> >> Ccases >> >> PS : my card is an advantech pcm-5823 > > It's a geode gx1? >
Yes > This looks like you did not initialize the SuperIO correctly. > > What SuperIO do you have on the board? > It's an Winbond W83977AF-F and I use the W83977TF on LinuxBios. thanks for your help regards Ccases -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
