Stefan Reinauer wrote: >> Another thing is something that a friend of mine says yesterday: why >> instead of removing the chip, take and desolder only the vcc pin, put >> a micro-switch on it, solder another chip on top of the existing and >> do the same with its vcc pin, so with two micro-switches you can >> select wich bios chip use. What do you think about this solution?.
Having a chip on your LPC bus with data and address lines connected but with no Vcc will mostly likely screw you. Operation of the chip will be undefined. > You also need to do this for CE and CS. > > No idea how hard or easy it is to desolder single pins instead of the > complete chip. It is a good idea though! On PLCC it will be pretty hard since they are not really pins that you can just lift up off the pad. -- Richard A. Smith [EMAIL PROTECTED] -- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
