[Please always reply to the mailing list, not individual developers] ----- Forwarded message from Anton <[EMAIL PROTECTED]> -----
From: Anton <[EMAIL PROTECTED]>
To: Uwe Hermann <[EMAIL PROTECTED]>
Subject: Re: [LinuxBIOS] ICH7DH: flash_enable failed
Date: Fri, 30 Mar 2007 19:08:41 +0400
On Fri, 30 Mar 2007 15:52:25 +0200
Uwe Hermann <[EMAIL PROTECTED]> wrote:
> On Tue, Mar 27, 2007 at 07:21:06PM +0400, Anton wrote:
> > flashrom's output below. what I've missed so far?
>
> Which chip is this? And on which mainboard do you try to use flashrom?
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express
Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev
01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev
01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev
01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev
01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GH (ICH7DH) LPC Interface Bridge
(rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller
(rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA
Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
04:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet
Controller
05:00.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
05:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000
Controller (PHY/Link)
05:05.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid]
Serial ATA Controller (rev 02)
00:00.0 Class 0600: 8086:277c
00:01.0 Class 0604: 8086:277d
00:1b.0 Class 0403: 8086:27d8 (rev 01)
00:1c.0 Class 0604: 8086:27d0 (rev 01)
00:1c.4 Class 0604: 8086:27e0 (rev 01)
00:1c.5 Class 0604: 8086:27e2 (rev 01)
00:1d.0 Class 0c03: 8086:27c8 (rev 01)
00:1d.1 Class 0c03: 8086:27c9 (rev 01)
00:1d.2 Class 0c03: 8086:27ca (rev 01)
00:1d.3 Class 0c03: 8086:27cb (rev 01)
00:1d.7 Class 0c03: 8086:27cc (rev 01)
00:1e.0 Class 0604: 8086:244e (rev e1)
00:1f.0 Class 0601: 8086:27b0 (rev 01)
00:1f.1 Class 0101: 8086:27df (rev 01)
00:1f.2 Class 0101: 8086:27c0 (rev 01)
00:1f.3 Class 0c05: 8086:27da (rev 01)
04:00.0 Class 0200: 8086:109a
05:00.0 Class 0300: 5333:8a01 (rev 01)
05:04.0 Class 0c00: 104c:8024
05:05.0 Class 0104: 1095:3114 (rev 02)
>
>
> > Calibrating delay loop... Setting up microsecond timing loop
> > 798M loops per second
> > ok
> > No LinuxBIOS table found.
> > Enabling flash write on ICH7DH...tried to set 0xdc to 0x3 on ICH7DH failed
> > (WARNING ONLY)
>
> This _could_ be a problem, but not necessarily. It might also work, I
> think.
But it doesn't.
P.S. Flash chip is *infamous* SST25LF080A :-)
----- End forwarded message -----
--
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
signature.asc
Description: Digital signature
-- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
